1967 fastback 485

[Stangman1]

So planning on going to a track rental at Lebanon valley this Friday. I usually like to get out once before the reunion to make sure every things ok. Haven’t driven it much this year only a few times back and forth to work. So the only reason why I’m posting this here is I finally got my tranny done at Broader and I’m hoping and praying this is my 60 ft problem that I’ve been complaining about. I did also put a set of the BBM B heads on the motor so I’m thinking maybe another 30 HP. Well we will see.

[6667fan]

Joe, what is the “radial prep”? Says no street tires allowed. Just wanted to make sure your slicks would play nice with that prep.
Or are you running drag radials?

[Stangman1]

I run drag radials. They will be prepping one lane for drag radials and one for slicks. I did buy a set of slicks but don’t have rims for them yet. My wife is having another surgery on Monday and yesterday the doctor called and said be ready if I call you Wednesday night for Thursday. So you don’t have to register till Thursday. I don’t think they are going to call her early though they said it’s a long shot. I have a buddy bringing a car also so it will be good to have someone else around.

[6667fan]

Joe, send me your contact info please so if I get on site I can look you up

Put it here or

jwysocki@charter.net

[Stangman1]

So I just got back from the FE reunion last night but let me back up to last weekend when I went to my local track. Still having my problem with my 60ft times which I will talk about later but ran a couple of 7.01s but broke the 100 mile an hour mark even with a 1.64 60 ft time. Only made two passes because I was throwing the alternator belt because of a pulley problem I was having which I fixed before the reunion. I believe the top end charge is because of my new heads that I installed.

So made it up to the reunion and was really expecting a 10.65 or 10.70 but first pass I ran a 11.26 which to say was a bummer would be an understament. Now it was muggy and when I got up there my car was at 190 and the fans came on while I was at the line and the tree was coming down and when my fans come on it’s an initial 80 amp draw (2 fans coming on at once). So next pass I left everything alone and just got up there at 170 and ran an 11.19. Obviously still not passable in my book. So even though I timed it a few weeks ago I was just looking to cover all my basses. I set my initial at 26 and have 8 in distributor. So I check and I have 22 and it seemed like it was really advancing when I revved it up but for the time being I put it at 26 and made a pass and ran 11.00 flat. So at that time being my eyes haven’t been the best lately I had someone watch timing light and dizzy only had 4 degrees in it. Everything seemed to be moving inside so for time being I put it up 4 degrees to get me to 34 total. Made another pass and ran a 10.88. That is a new PB for me that was with a 1.59 60 ft time and the last 2 passes I was foot raking it at like 2200 but that’s all I could get because I could stop car from moving. My buddy jerry had a cellphone rollbar holder and me and Noelle set it up pointing to tach and footbraking it at 2200 and taking off it was only flashing to 3200 and it’s a ATI 42-4400 stall converter. A lot of people know I’ve been chasing this 60 ft problem for a couple of years. I didn’t want to be wrenching and aggravating myself all weekend so I left it were it was and just tried to have fun. Friday I made it to the semis in the gamblers race and Saturday I made it to the semis in Hot FE. Both times I had the fans come on while I was at the line so I have some issues but had a great time with my daughter and Harry came up this year and is always a good sounding board even though everytime he says something he finishes with but what do I know. Dad didn’t go because my moms not doing well but got to see everyone again the year. Steve and Ed who over the years are practically family to us are always a blast to hang with. I don’t was to forget Richie D and Andy and thank you Karen for feeding us she’s like a cooking machine. So will be looking into converter and dizzy which when right will probably get me to my 10.50 to 10.60 range which is were I think I should be. And it’s not like I want to get every last drop out of the car but with everything working properly I think it would be easier on motor and all related parts. Sorry for the length of this post but a lot happened in a short three days.

[6667fan]

Alright, Alright, Alright!
Congrats on getting into 10s
33* total might be all you need with those heads.

[cjshaker]

Joe, timing problems aside, how was the air there? The humidity here has been kind of bad, and Beaver Springs usually isn't much better from the times I've been there. And don't forget that that track is all uphill. Don't guys usually run 1-2 tenths slower there? Maybe it wasn't as bad as you think? Congrats on a PB.

[Stangman1]

It was muggy Saturday. Cool in morning but by race time my car was slowing down. I’m just glad we had a good time and didn’t brake anything. But I think there’s some time in the right converter. When I put new motor in I had a 3-3200 stall converter and ordered a 4200 converter for new camshaft. When it was still a dog off the line I assumed it was the tranny and got it done. It never occurred to me the converter would be bad. And my dizzy being off a little. Well I guess ya never know.