Author Topic: 1967 fastback 485  (Read 141872 times)

0 Members and 1 Guest are viewing this topic.

Stangman1

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: 1967 fastback 485
« Reply #150 on: August 08, 2026, 07:21:24 PM »
So planning on going to a track rental at Lebanon valley this Friday. I usually like to get out once before the reunion to make sure every things ok. Haven’t driven it much this year only a few times back and forth to work. So the only reason why I’m posting this here is I finally got my tranny done at Broader and I’m hoping and praying this is my 60 ft problem that I’ve been complaining about. I did also put a set of the BBM B heads on the motor so I’m thinking maybe another 30 HP. Well we will see.

6667fan

  • Hero Member
  • *****
  • Posts: 842
  • Every Second Counts
    • View Profile
Re: 1967 fastback 485
« Reply #151 on: August 11, 2026, 07:16:28 AM »
Joe, what is the “radial prep”? Says no street tires allowed. Just wanted to make sure your slicks would play nice with that prep.
Or are you running drag radials?
JB


67 Fairlane 500
482 cid 700/617
TFS Tunnel Wedge, BP BBM Heads,  Bullet Custom Solid Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

Stangman1

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: 1967 fastback 485
« Reply #152 on: August 11, 2026, 10:30:09 AM »
I run drag radials. They will be prepping one lane for drag radials and one for slicks. I did buy a set of slicks but don’t have rims for them yet. My wife is having another surgery on Monday and yesterday the doctor called and said be ready if I call you Wednesday night for Thursday. So you don’t have to register till Thursday. I don’t think they are going to call her early though they said it’s a long shot. I have a buddy bringing a car also so it will be good to have someone else around.

6667fan

  • Hero Member
  • *****
  • Posts: 842
  • Every Second Counts
    • View Profile
Re: 1967 fastback 485
« Reply #153 on: August 11, 2026, 12:39:37 PM »
Joe, send me your contact info please so if I get on site I can look you up

Put it here or

jwysocki@charter.net
JB


67 Fairlane 500
482 cid 700/617
TFS Tunnel Wedge, BP BBM Heads,  Bullet Custom Solid Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’