Author Topic: Adjustable timing pointers are here and ready to ship!  (Read 6484 times)

0 Members and 1 Guest are viewing this topic.

KjcfeF100

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #15 on: September 10, 2021, 09:01:20 AM »
I'll take one

Dan859

  • Full Member
  • ***
  • Posts: 190
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #16 on: September 13, 2021, 10:23:50 AM »
I'd like one.

rcianci

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #17 on: September 21, 2021, 12:03:59 PM »
Brent just making sure you got my email to your private email for one of your pointers along with my credit card. Can you confirm either here or my private email which I tink you have. Thx. Bob.

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Gauging interest in new product: adjustable timing pointer
« Reply #18 on: September 21, 2021, 12:33:32 PM »
Brent just making sure you got my email to your private email for one of your pointers along with my credit card. Can you confirm either here or my private email which I tink you have. Thx. Bob.

I got it.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

DubyaTF

  • Jr. Member
  • **
  • Posts: 78
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #19 on: September 24, 2021, 02:59:00 PM »

   Any photos you can share of the printed version? What's the final finish on these? Anodized or bare?
Jeff

Jb427

  • Sr. Member
  • ****
  • Posts: 338
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #20 on: September 28, 2021, 09:07:01 PM »
My ati balancer is out 4deg advanced side if you think there is enough adjustment ill take one.

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Gauging interest in new product: adjustable timing pointer
« Reply #21 on: October 08, 2021, 03:26:11 PM »
They are here.  I have 29 left.



Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

bsprowl

  • Full Member
  • ***
  • Posts: 213
    • View Profile
    • Ford FE Information
Re: Adjustable timing pointers are here and ready to ship!
« Reply #22 on: October 08, 2021, 08:39:31 PM »
I'll take two.

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Adjustable timing pointers are here and ready to ship!
« Reply #23 on: October 09, 2021, 05:43:02 AM »
I'll take two.

Bob, shoot me an email and I'll get it handled.  brent@lykinsmotorsports.com
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

Rory428

  • Hero Member
  • *****
  • Posts: 998
    • View Profile
Re: Adjustable timing pointers are here and ready to ship!
« Reply #24 on: October 09, 2021, 06:32:40 PM »
Any photos of the later style timing cover setup, with the one small screw, one 3/8" bolt holding the pointer?
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. 428 Cobra Jet, 4 speed Toploader. 12.54@ 108 MPH

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Adjustable timing pointers are here and ready to ship!
« Reply #25 on: October 09, 2021, 06:53:47 PM »
Any photos of the later style timing cover setup, with the one small screw, one 3/8" bolt holding the pointer?

Rory, the timing covers I have here with the 3/8" bolt still have the two smaller holes.  I assumed that the position was still the same between the two covers.   If they're not the same, then I will have to try the pointer out on another cover.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

fairlaniac

  • Sr. Member
  • ****
  • Posts: 458
    • View Profile
Re: Gauging interest in new product: adjustable timing pointer
« Reply #26 on: December 15, 2021, 02:07:17 PM »
Ok, I have these finalized and the order placed.  I should have them by the first week of October, I ordered quite a few. 

I'll post when they come in. 

On the engine I have sitting on the stand, the pointer allows me to adjust in a span of 10°. 

Final price with stainless screws and washers will be about $28 plus shipping.  I'm gonna snag a load of USPS Priority small flat rate boxes, so you can count on about $6 for shipping.

Brent, Did you get the pointers in and would it fit my situation discussed in the Tech Forum using with my ATI balancer?

Thanks,
Doug Bender
1966 Fairlane 427+/5 Spd TKX
1964 Comet Pro Street 427+ (in progress)

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Gauging interest in new product: adjustable timing pointer
« Reply #27 on: December 17, 2021, 05:53:03 AM »
Ok, I have these finalized and the order placed.  I should have them by the first week of October, I ordered quite a few. 

I'll post when they come in. 

On the engine I have sitting on the stand, the pointer allows me to adjust in a span of 10°. 

Final price with stainless screws and washers will be about $28 plus shipping.  I'm gonna snag a load of USPS Priority small flat rate boxes, so you can count on about $6 for shipping.

Brent, Did you get the pointers in and would it fit my situation discussed in the Tech Forum using with my ATI balancer?

Thanks,

They've been in for a while.  Just have a few left.   If you wanna try one, if it doesn't work, I'll give you your money back.  It has 8-10° range, maybe a little more if you cut the end of the slot out on the passenger side of the bracket.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

blykins

  • Hero Member
  • *****
  • Posts: 4801
    • View Profile
    • Lykins Motorsports
Re: Adjustable timing pointers are here and ready to ship!
« Reply #28 on: April 16, 2022, 01:06:18 PM »
Just got another shipment of these in.......they are ready to ship out.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports