Author Topic: Videos of one after it's in the car - Danny T's all-iron 461 CJ  (Read 632 times)

0 Members and 1 Guest are viewing this topic.

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
Videos of one after it's in the car - Danny T's all-iron 461 CJ
« on: February 23, 2021, 03:35:49 PM »
This one was in the dyno section a long time ago, 525 HP range, 15+ inches of vacuum, pump gas, all iron, including the intake.  Painted and detailed to look like a CJ fresh off the assembly line in 1968. Only non-stock look are headers and a double pumper for a Day 2 appearance, but even then, the carb is hidden under an original ram air air cleaner.

The car is a beauty, and Danny is finishing the resto and got it fired.  This one ran really well and did everything we wanted, but the sound really is the icing on the cake.  Just right for a what a Day 2 CJ would sound like, but at 150 more HP than most saw in the day!

https://youtu.be/AJEC--DkrVw

https://youtu.be/Yh-eUhjo-S4

Enjoy!
« Last Edit: February 23, 2021, 07:02:35 PM by My427stang »
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

1968galaxie

  • Full Member
  • ***
  • Posts: 100
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 462 CJ
« Reply #1 on: February 23, 2021, 04:38:49 PM »
Well done!
Looks as good as it sounds.

Can't wait for an in-car video - melting the tires.

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Henrysnephew

  • Jr. Member
  • **
  • Posts: 33
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #3 on: February 23, 2021, 08:56:02 PM »
Very nice Ross, hydraulic roller cam?  Randy M

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #4 on: February 23, 2021, 09:22:28 PM »
Yes, hyd roller cam, Lykins non-adjustable roller rockers, Doug Garifos stands
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

427Fastback

  • Hero Member
  • *****
  • Posts: 556
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #5 on: February 23, 2021, 10:15:56 PM »
well done and see its a 428 Coupe.
1968 Mustang Fastback...427 MR 5spd (owned since 1977)
1967 Mustang coupe...Trans Am replica
1936 Diamond T 212BD
1990 Grizzly pick-up

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #6 on: February 24, 2021, 04:32:07 AM »
well done and see its a 428 Coupe.

From the factory 4.30 4 speed CJ coupe, and he did it nice.  Great car
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Rory428

  • Hero Member
  • *****
  • Posts: 556
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #7 on: February 24, 2021, 08:58:04 AM »
Looks great, will it see any dragstrip action at all? Could surprise some newer muscle cars, if it can find any traction.
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. a;; stock 332 2 barrel2 speed FordOMatic

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #8 on: February 24, 2021, 12:31:49 PM »
It certainly is not its  primary use but I think you’ll probably see it at the FE Reunion. It’s got Caltrac bars and their mono leaf rear springs out back, should do ok compared to my tire burner lol
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Twinibeam66

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #9 on: February 24, 2021, 02:04:53 PM »
Sharp Mustang !!! and sounds great !  Wonder what the cam specs are ??

My427stang

  • Hero Member
  • *****
  • Posts: 3455
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #10 on: February 24, 2021, 02:23:33 PM »
I used a single pattern custom hyd roller, 237 @ .050, 114 LSA Intake flowed over 300 and exhaust was very good with a properly sized primary pipe . Typically a little split on the exhaust side works better but in this case we were very fussy about making vacuum, so we tried to make the exhaust and head work well
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Twinibeam66

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #11 on: February 24, 2021, 02:59:16 PM »
ok thanks it sounds so good had to ask 

TomP

  • Hero Member
  • *****
  • Posts: 583
    • View Profile
Re: Videos of one after it's in the car - Danny T's all-iron 461 CJ
« Reply #12 on: February 25, 2021, 12:13:31 AM »
That looks and sounds great.