1964 Comet Blown injected Cammer

[Leny Mason]

This is my project A 8/71 Dyers blower Hilborn injection Enderly hat, We made the fenders six inches longer to make room for the blower drive stuff and radiator we are making a full frame tubed in the rear for 17x 33x16 tires and Mustang front suspension here are some pictures. Thanks Leny Mason

[Tommy-T]

That's baddass , Leny!

Blown cars rock!

Gott'a get started on my '65 Cyclone project. Not quite as radical as yours...but still FE powered.

It doesn't look like your blower belt will play nice with your distributor. A pal of mine has the exact same problem. Let us all know the fix.

[Leny Mason]

Tommy this is what I am doing to move my distributor cap out of the way of the blower belt. Leny Mason

[mike7570]

Here's an odd distributor on a cammer built by a late friend of mine. Not sure where it came from but in makes room for the belt.

[Leny Mason]

Cool car fun to set the points on it, is it your car I love it. Leny Mason

[BH107]

Butch's distributor setup clears normal blower pulleys. The car originally had a mag mounted upside down like the one above, but the new setup is much cleaner. Your setup looks great too Lenny.

Another common way if not running a water pump is to run it off of the stub cam, especially if the fuel pump is running off of the idler gear.

[ec164]

Leny that is going to be awesome, looking forward to seeing it done....your engine is Killer......Al

[Leny Mason]

Well maybe it will work but it is so close I am not comfortable with it being that close I have seen Butches and it works  i just have a lot of money in this engine and call me scared  Anyway I think my idea will work with lots of room. Leny Mason

[Leny Mason]

I ordered the rear end housing today a full flouter forty inches axle flange to axle flange, four link brackets are twenty inches wide, with thirty five spline axles,and Wilwood brakes, I am thinking of using an air locker posatraction any ideas on that,  the frame is almost done but we need the housing to finish the shock brackets I will do pictures of the frame when it's done. Leny Mason

[Leny Mason]

My Comet frame

[turbohunter]

That is some very sexy stuff Leny.
I love the whole idea of a blown Comet. That thing will be badass.

[Leny Mason]

I hope so might need a roll of big ditties on the dash. Leny Mason

[ec164]

Very nice work Leny, their will be no flex, looking forward to completion.......Al

[machoneman]

So Lenny. Will you paint it up to look like this one? If not, maybe share some color schemes?  We wanna know!

http://bangshift.com/general-news/videos/watch-the-real-chrismans-comet-make-a-run-at-oxford-plains-dragway-blown-ford-cammer-on-nitro/

[Leny Mason]

Hi, I think mine will be black, that car is cool as hell I have sat in that one a friend owned it in the seventy's,  and Jim bought it from him, it's great that Jim put a Cammer back in it and the straight through tranny  One to one all the way, I wish I could buy it dang it. Leny Mason