Dedicated to Building and Racing the Ford FE Engine
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
SMF - Just Installed!
Home
Help
Search
Login
Register
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
2d Elect Oil Pressure guage
« previous
next »
Print
Pages: [
1
]
Author
Topic: 2d Elect Oil Pressure guage (Read 1832 times)
0 Members and 1 Guest are viewing this topic.
MHarvey
Jr. Member
Posts: 27
2d Elect Oil Pressure guage
«
on:
November 10, 2018, 02:18:07 AM »
How would I install a second oil pressure gauge...I believe just connecting a second gauge to the same sensor will provided a reduced reading...but where would I install the second sensor?
Logged
Rory428
Hero Member
Posts: 1008
Re: 2d Elect Oil Pressure guage
«
Reply #1 on:
November 10, 2018, 02:26:23 AM »
In the past, I have always just used a brass Tee fitting on the oil filter adapter, so I could retain my factory oil pressure gauge or idiot light, as well as an aftermarket mechanical gauge. Worked just fine.
Logged
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. 428 Cobra Jet, 4 speed Toploader. 12.54@ 108 MPH
MHarvey
Jr. Member
Posts: 27
Re: 2d Elect Oil Pressure guage
«
Reply #2 on:
November 10, 2018, 02:44:26 AM »
thanks...simple and cheap
Logged
MHarvey
Jr. Member
Posts: 27
Re: 2d Elect Oil Pressure guage
«
Reply #3 on:
November 10, 2018, 11:49:34 PM »
I did see a more cosmetic option..a sandwich adapter...but what one fits....most do not go back to 1969
Logged
gdaddy01
Hero Member
Posts: 658
Re: 2d Elect Oil Pressure guage
«
Reply #4 on:
November 12, 2018, 11:03:55 AM »
be carefull with the brass Tee fitting, the cheap ones are cut to thin and will break off at the threads .
Logged
BattlestarGalactic
Hero Member
Posts: 1296
Re: 2d Elect Oil Pressure guage
«
Reply #5 on:
November 12, 2018, 12:31:58 PM »
^^This.
I had one crack/break on the wagon many years ago. I ran a low pressure switch to my fuel pump. It cracked, leaked and I have to do surgery on it on a Sat at the track. Never did reinstall that switch.
Logged
Larry
Diogenes
Sr. Member
Posts: 276
Re: 2d Elect Oil Pressure guage
«
Reply #6 on:
November 12, 2018, 02:52:37 PM »
You should be able to find a steel tee to use, instead of brass. NAPA stores typically have a selection of steel fittings.
Logged
WHEN CRIMINALS MAKE THE LAWS, OBEYING THE LAW IS A CRIME.
1966 Galaxie 500 390 Toploader 3.89 Traction-Lock 9in.
1985 Toyota Celica Supra
1971 Montego MX wagon 351C Toploader Detroit Locker Cyclone competition gauge/dash bucket seats/console
1989 Texas DPS Police Mustang
1971 Torino GT 351C 4V AT
1968 Cougar 351W Toploader Traction-Lock 8in.
1989 Dodge Omni modified 2.5 turbo from hell
Print
Pages: [
1
]
« previous
next »
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
2d Elect Oil Pressure guage