Specification sheet for the TRW or Seal Power 2294 428 standard bore pistons

[dozz302]

Hello, just wondering if anyone has the spec. sheet for the 2294 pistons standard bore. These have a dome. I think they are TRW or Sealed Power. Thanks eparocz@aol.com

[Tommy-T]

From my 1983 TRW catalog:

L2294F piston std.

1.65 Comp. Dist.

.125 Dome Height

Compression ratio 12.69 with 69.6 cc
                           12.0 with 74.3 cc     with .015 deck clearance and .035 gasket

If they are decent, a full set, and for sale, I'm interested
gearhead427@verizon.net

[dozz302]

Thank you for the response. Well I'm putting together a motor and have 2 sets of pistons. Not sure which I will use. I will keep your response and If I do sell I will contact you first. Thanks again.

[dozz302]

Do you happen to know the thickest head gaskets you can buy that are not the cometics- there very expensive. My CJ heads have 66.2 cc chambers. How much would they have been milled then? Just asking -I'll probally start another post if you don't know. Thanks

[Tommy-T]

The Felpro 8554PT head gasket comes in at about .050.

That's the thickest non Cometic or SCE head gasket I can think of.

[dozz302]

Thanks, I'll check them out.

[winr1]

Rock Auto has the best price

https://www.rockauto.com/en/parts/fel-pro,8554PT,cylinder+head+gasket+/+set,5412



Ricky.