31
FE Technical Forum / Re: Rocker Adjuster Wear - Rapid
« on: June 27, 2023, 07:07:54 AM »
Rory, You understand correctly.
Nightmist, yes the same pushrods.
Brent, i wondered if the lifters were oiling through the pushrods, but when i primed it last time that did not seem to be the case, i will test this again and i guess if they really should be oiling and aren't i need to investigate that as well.
Im also now remembering there were two springs specified at the time and i may have used the heaver spring - I thought i had run this down a while back but cant find it. It wasn't much heavier IIRC.
Nightmist, yes the same pushrods.
Brent, i wondered if the lifters were oiling through the pushrods, but when i primed it last time that did not seem to be the case, i will test this again and i guess if they really should be oiling and aren't i need to investigate that as well.
Im also now remembering there were two springs specified at the time and i may have used the heaver spring - I thought i had run this down a while back but cant find it. It wasn't much heavier IIRC.