« previous next »
Pages: [1]

Author Topic: OEM 427 steel flywheel  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

6667fan

  • Hero Member
  • *****
  • Posts: 798
  • Every Second Counts
    • View Profile
OEM 427 steel flywheel
« on: January 11, 2020, 09:10:18 PM »
What years/versions of 427s caught steel flywheels?
Thanks,
JB
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

6667fan

  • Hero Member
  • *****
  • Posts: 798
  • Every Second Counts
    • View Profile
Re: OEM 427 steel flywheel
« Reply #1 on: January 14, 2020, 04:12:17 PM »
Perhaps I imagined them. Did 427s catch a different grade of iron? I have a wheel here with the reliefs around the bolt heads and a relieved area at the very inner of the clutch mounting surface that I though to be a 427 flywheel.

JB
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

Dr Mabuse

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
No OEM 427 steel flywheel
« Reply #2 on: January 19, 2020, 11:39:30 PM »
As far as I know, OEM 427 manual trans flywheels were all cast iron.
Logged
Pages: [1]
« previous next »