Question for Brent

[fryedaddy]

mine busted through all eight holes but only one or two leak.but thats one or two too many.  can the incerts be taken out and can those keencerts be put in without removing the heads

[Heo]

You should be able to do that dip the tap in grease so the
shavings get stuck in the grease

[fryedaddy]

You should be able to do that dip the tap in grease so the
shavings get stuck in the grease

i could remove the intake and catch it from the bottom of the holes

[Heo]

yes that to,

[wowens]

Per Harland Sharp tech their stands are 1.375 stand mounting base to shaft centerline

[blykins]

Per Harland Sharp tech their stands are 1.375 stand mounting base to shaft centerline

If I remember correctly, the Comp set was about 1.400".  I think the POP stands showed a ~1.400" height as well.