« previous next »
Pages: [1] 2  All

Author Topic: Anybody put a E$od in a 63?  (Read 5788 times)

0 Members and 1 Guest are viewing this topic.

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Anybody put a E$od in a 63?
« on: February 12, 2019, 11:37:41 AM »
Ok
Looking for options and wanted to know if anyone has installed a E4OD in a 63.
I don't mind buying an adapter and controller but don't want to cut my tunnel to much.
Greg
Logged

e philpott

  • Hero Member
  • *****
  • Posts: 1010
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #1 on: February 12, 2019, 11:48:01 AM »
Never installed one in a 63 but overhauled a bunch of E4OD over the years and it sure is big , if you don't have mega power a AOD style 4R70 and 75 are pretty stout and much smaller than E4OD , you would still have the adapter and controller to deal with
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #2 on: February 12, 2019, 11:51:12 AM »
I should be putting out about 450 HP and I wasn't sure if a aod or a 4r70 would hold up.
Greg
Logged

Katz427

  • Sr. Member
  • ****
  • Posts: 471
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #3 on: February 12, 2019, 12:00:47 PM »
I gave up on the idea when I put the E4OD next to the C6. Definitely need transmission tunnel work.
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #4 on: February 12, 2019, 12:05:18 PM »
I wasn't sure how much bigger the E4OD was compared to the C6. That is why I was asking.
I really don't want to modify my tunnel.One of the reason I bought this car was because it needed no body work.
My Ranchero ruined me for doing rust repair and bodywork.
Greg
Logged

Katz427

  • Sr. Member
  • ****
  • Posts: 471
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #5 on: February 12, 2019, 12:11:43 PM »
Same for me. This here Galaxie is from AZ originally, beautiful floor pan. I can't bring myself to cut it.
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #6 on: February 12, 2019, 12:16:26 PM »
Yes I agree.
So a new question, Has anybody has success with a 4r70 handling Horsepower.
How reliable are they on the street with 10 or 12 trips to the strip every year?
Greg
Logged

e philpott

  • Hero Member
  • *****
  • Posts: 1010
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #7 on: February 12, 2019, 12:51:29 PM »
4R70/75 should be fine … AOD would need a real good build , 4R70 you could throw in there
« Last Edit: February 12, 2019, 12:54:32 PM by e philpott »
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #8 on: February 12, 2019, 12:55:33 PM »
Good to know.
A friend of mine has a salvage yard and the tranny is free. So I will just have to shell out $750.00 for the adapter and 500.00 for the controller and the rebuild kit.
Sounds like the way to go.
Greg
Logged

Dumpling

  • Sr. Member
  • ****
  • Posts: 401
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #9 on: February 12, 2019, 04:05:25 PM »
You're in GearVendor cost range; another possible option...
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #10 on: February 12, 2019, 04:41:14 PM »
I looked at the gear venders but they were in the $3000.00 plus price range.
I searched on the net and the cheapest used one I found was 2600.00.
I can buy the adapter for $750, the controller for $500.00 and the master street-strip kit for 350.00.
I can rebuild the tranny myself so nothing in it but my time.
So I am looking at about $1900.00 plus any incidentals.
Will have to buy a driveshaft anyway as my car came without one. The original owner must not have checked the option list when he bought it.
Greg
Logged

drdano

  • Hero Member
  • *****
  • Posts: 541
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #11 on: February 12, 2019, 05:42:12 PM »
I put a E40D wide-ratio gear kit in a C6 in my '62 before going to a manual.  I still had to cut up the cross member to clear the pan on the C6, but it did fit the tunnel a-ok.  The wide ratio kit was nice, got up and moving in a hurry.  If you're not hell-bent on that O.D. gear, a kit in a C6 could work for you.
Logged

Dumpling

  • Sr. Member
  • ****
  • Posts: 401
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #12 on: February 12, 2019, 05:44:59 PM »
Upfront, I know little about transmissions, so don't know if the below are complete/usable...


Quick Google search, 2 of the results:

https://www.ebay.com/i/232942288717?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F232942288717%25253Fchn%25253Dps%2526itemid%253D232942288717%2526targetid%253D477790344225%2526device%253Dt%2526adtype%253Dpla%2526googleloc%253D9021668%2526poi%253D%2526campaignid%253D1591256095%2526adgroupid%253D62826453031%2526rlsatarget%253Dpla-477790344225%2526abcId%253D1139306%2526merchantid%253D114732716%2526gclid%253DEAIaIQobChMIrfCby6G34AIVdv_jBx2W2AQBEAkYBiABEgLkY_D_BwE%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1856479137809%2526rvr_ts%253De3de970b1680a8843345224afff0585e



https://www.ebay.com/i/233060455966?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F233060455966%25253Fchn%25253Dps%2526itemid%253D233060455966%2526targetid%253D543737989086%2526device%253Dt%2526adtype%253Dpla%2526googleloc%253D9021668%2526poi%253D%2526campaignid%253D1497308096%2526adgroupid%253D59509629482%2526rlsatarget%253Dpla-543737989086%2526abcId%253D1139476%2526merchantid%253D114732716%2526gclid%253DEAIaIQobChMIrfCby6G34AIVdv_jBx2W2AQBEAkYASABEgKpZPD_BwE%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1856648302113%2526rvr_ts%253De3e1a6ac1680a99befd5ef96fff02490
« Last Edit: February 12, 2019, 05:50:07 PM by Dumpling »
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 978
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #13 on: February 12, 2019, 06:53:13 PM »
drdano
I all ready have the wide ratio conversion in my C6. When I rebuilt it 2 years ago That is one of the things we upgraded. Just not sure if it will do what I want.
Dumpling
Thanks for the link. I checked it out and I would need a Doug Nash overdrive unit for it.
Would love to have a DN but don't know if I can find a unit to fit a C6 and how hard it would be to get replacement parts now.
The 2 I had in the 70's were great and never gave me any problems.
Greg
Logged

Drew Pojedinec

  • Hero Member
  • *****
  • Posts: 2141
    • View Profile
Re: Anybody put a E$od in a 63?
« Reply #14 on: February 12, 2019, 10:57:12 PM »
Is there an E4OD converter that works with 1.849 pilot?
Logged
Pages: [1] 2  All
« previous next »