Author Topic: 67 & 68 Mustang and FE Parts for sale  (Read 3079 times)

0 Members and 1 Guest are viewing this topic.

Bolted to Floor

  • Hero Member
  • *****
  • Posts: 602
    • View Profile
67 & 68 Mustang and FE Parts for sale
« on: August 23, 2015, 12:02:35 PM »
Cost of part + actual shipping cost. If you see something you like but not the price, shoot me an email with a reasonable offer.

D2TE AA Heads. $200.00 Date codes 5L4 and 5L21. Exhaust is drilled for Cobra Jet pattern. Stock size intake and exhaust valves. They were gone through by A Guaranteed motors in Houston as part of a long block rebuild about 8 years ago, they have never been ran. They will need to be disassembled and cleaned. SOLD

Lincoln Versailles Disc Brake 9 Inch Rear End. No center section, all other parts are there. It's been under a non-running car for the last 20 years, will need some TLC. This housing is the same dimension as the 65/66 Mustang. $325.00 or best offer. Not really interested in shipping this SOLD
 
Headers, Fits 67 & 68 Mustang with 390 / 428 motor. They were installed in my 67 with a 4 speed transmission. No power steering or power brakes. They have a few dents and dings for clearance.  No tags or markings to determine manufacturer. One bolt hole looks bad cause the bolt was removed with a cutting torch. $100.00 SOLD
 
Clutch disk Centerforce #281226, New in box never used. 11", input shaft spline 1-1/16"-10. Was bought for 67 Mustang with 390. Will fit other Fords. $75.00 Follow link to Centerforce site.  http://www.centerforce.com/products/product-detail/id/CTF-281226/name/centerforce-i-ii-clutch-disc

Flowmaster Series 40 Mufflers Part #43041 Offset in and center out, 3" steel. $50.00 for the pair. Been in the rafters of my garage for years. SOLD
 
DynoMax Super Turbo Mufflers Part # 17731 for 2-1/4" pipe with offset in and center out. One of them has some dents on the end from removal. $40.00 for the pair.

Inner Cowl vent repair panels for 67 Mustang $25.00 each or $40 for both.

67/68 Hood Louvers with air scoop grill intact $50.00 for the pair.
 
1968 Mustang Quarter Panel Reflector Bezel $10.00 for the pair
 
68 Grill Outer Molding, Ornament Corral, and Running Pony Ornament $60.00 for all three pieces. They need to be cleaned up.
 
Power steering pump bracket from a late 70's full size car. Part # D8AE 3A732-AA $10.00
 
There are pictures at:
http://s1068.photobucket.com/user/jpdixon6/library/?sort=2&page=1#/user/jpdixon6/library/?sort=2&page=1&_suid=139855603712209224513333850106
 
If the pictures are still there, I still have the parts.
« Last Edit: January 16, 2016, 05:20:37 PM by Bolted to Floor »
John D -- 67 Mustang 390 5 speed

fastback 427

  • Sr. Member
  • ****
  • Posts: 442
    • View Profile
Re: 67 & 68 Mustang and FE Parts for sale
« Reply #1 on: August 23, 2015, 11:30:46 PM »
I'll take the headers for an upcoming project. I'll send you a message, thanks, Jaime.
Jaime
67 fastback 427 center oiler 428 crank Dove aluminum
top end toploader
67 fairlane gta cross bolted 12:1 390 Dove aluminum top end c6 3600 stall
65 falcon straight axle project
67 mustang coupe project
76 f350 dually 390 mirror 105 4bbl 4spd
74 f100 xlt 390 c6 factory ac

Bolted to Floor

  • Hero Member
  • *****
  • Posts: 602
    • View Profile
Re: 67 & 68 Mustang and FE Parts for sale
« Reply #2 on: August 24, 2015, 09:21:55 PM »
Thanks Jaime, Sent a PM back.
John D -- 67 Mustang 390 5 speed