Thinking Bigger and a bit of humour.
Car: 1968 Mustang Fastback
Eng: 427 Genesis 482 ci Victor intake with a 150 shot.
Trans: C6 with 10", but most likely needs to be looser though.
Rear gear: What ever it needs.
Useage: Street, Strip, Hardware store run, wherever I need to go. It's my car.
Based on Lunati's newest computer designed cam profiles, this series of Solid Roller Tappet camshafts are designed specifically for drag race applications where mid to high RPM performance and round after round consistency is most critical.
Solid roller, rough Idle. Good cam for bracket racing applications with 390-428 cubic inch motors with aftermarket performance heads. Needs 4000-4500 RPM stall converter, headers, 11:1 compression ratio or better and 4.56 gearing or better.
Advertised Duration (Int/Exh): 302/310
Gross Valve Lift (Int/Exh): .751/.751
LSA: 108
RPM Range: 4500-8000
Includes: Cam Only
Part Number: 505A1LUN
http://www.lunatipower.com/Product.aspx?id=2265&gid=253