Joe, about 25 years ago, I ran a C6 in my Fairmont, with the 428. I had a 8" TCS convertor, and originally was foot braking, with a reverse pattern manual valve body from TCI. The most that I could ever get was 4500 stall , at WOT with the foot brake, but later on, I switched to a Ford Motorsport/Art Carr transbrake valve body. Like Mike, I did not have a 2 step, so I was launching the car at WOT on the transbrake, and at WOT on the transbrake, I could get 5200 RPM from the same convertor. By the way, my 60 foot times dropped almost a full tenth, leaving at WOT, from mid 1.40s, to mid 1.30s, but of course, that can only happen if the car hooks up well on the transbrake. My understanding is that drag radials don`t like hard hit shock loads, which is why you very rarely see a stick car run radial slicks, or drag radials. But if you leave on the transbrake at a lower RPM with a 2 step, you may be just fine. Personally, I like to gear a car to be at redline at the 1/4 mile mark, but I understand that you do more street driving than drag racing.