Author Topic: Toploader questions  (Read 104 times)

0 Members and 1 Guest are viewing this topic.

c9zx

  • Full Member
  • ***
  • Posts: 146
    • View Profile
Toploader questions
« on: May 31, 2026, 12:10:37 PM »
I have a RUG M3 wide ratio from a 1969 Mustang/Cougar 390 that I need to go through. Casting date on the C8 main case is 02/06/1969. I've looked on David Kee's site and have the book he sells. The question is, would this transmission have type 3 or type 4 detents and springs? Second question, are the 1 and 2, and 3 and 4 shift rails the same or slightly different? The problem I'm trying to fix is, it really doesn't want up shift into 3rd gear but will. But it will not downshift from 3rd into 2nd gear. Any input will be appreciated. Chuck
1969 Eliminator G code
CSX-7031 FIA Cobra
2007 Mustang GT, Whipple
1966 Cyclone GT

allrightmike

  • Sr. Member
  • ****
  • Posts: 276
    • View Profile
Re: Toploader questions
« Reply #1 on: May 31, 2026, 04:52:45 PM »
  This info may or may not be helpful. These transmissions use GL4 lube made for brass blocker rings. The synchros do not want synthetic gear lube (hard shifting).  The detent thing can be very confusing (they changed the design at least three times). Take photos as you disassemble the various pieces, keep them in order, you'll be glad you did.