What pulleys were on a 427 sohc

[1932fe]

Hi
Wondering what front pulleys on the water pump and crank, only looking for single grove ones  were on the 427 sohc , as am looking for stock or similar stock for the coupe engine, I have heard  61-62 thunderbird , as well as 61-62 galaxies, anyone have some insight to this, As cant run after market  ones as not the right look for engine style.
Thanks Paul

[hotrodfeguy]

I know the WP is 61 T-bird. I was going to build a cammer one day but have decided to go full tilt wedge. With a help from a few friends

[jayb]

Here is the crankshaft pulley info, courtesy of my old friend SOHC Bob (RIP):

The Sohc parts

C4AE-6316-E Damper Assy Crankshaft Vibration 4000-4400 CPM -1

C5AE-6A359-F Crankshaft Pulley Outer - 1

Screw And Washer Assy 374525 (Attach Pulley To Damper) - 3

[1932fe]

Thank you both for the info just what was needed Thanks Paul

[hotrodfeguy]

Are you building one?

[hotrodfeguy]

Is the B anything like the E ?

[1932fe]

Hi
Yes I am building  one as far as all the outer dimensions are concerned , as we have very little room so I need to know all external measurements to see how the engine sit in the rails,  Have so  far seen we may have to change steering box. Barry R  is going to do the final  build for me.

[hotrodfeguy]

Isn't the water pump C1SE-6A301-B