« previous next »
Pages: [1]

Author Topic: FE "block print" for lifter bore spacing  (Read 889 times)

0 Members and 1 Guest are viewing this topic.

XR7

  • Guest
FE "block print" for lifter bore spacing
« on: December 03, 2023, 03:45:22 PM »
I thought I had a copy of the block print for the lifter bore spacing. I can't find it and/or lost it... I have a partial print for some reason but don't have the full view (see attachment). Can anyone share that with me please? Higher the resolution the better. Thanks.
Logged

frnkeore

  • Hero Member
  • *****
  • Posts: 1249
    • View Profile
Re: FE "block print" for lifter bore spacing
« Reply #1 on: December 03, 2023, 04:38:45 PM »
The lifter bore spacing for all FE's, including 427 MR, is 1.98. The same as the LR valve spacing.

On the print subtract 1.145 from 3.125, that is the bore spacing.
Logged
Frank

'60 Ford Starliner
Austin Healey Replica with 427 & 8.5 Cert

XR7

  • Guest
Re: FE "block print" for lifter bore spacing
« Reply #2 on: December 03, 2023, 05:18:41 PM »
Thanks, I know that, but I wanted all the running dimensions, cumulative, for all bores running down the bank, the bank angle etc. This is for a CNC machine, that doesn't have the FE program. I am hoping someone has the full image of the print.
Logged

Tunnelwedge

  • Sr. Member
  • ****
  • Posts: 275
    • View Profile
Re: FE "block print" for lifter bore spacing
« Reply #3 on: December 04, 2023, 05:01:23 AM »
Logged

XR7

  • Guest
Re: FE "block print" for lifter bore spacing
« Reply #4 on: December 04, 2023, 12:27:50 PM »
 :)  Thank you sir!
Logged
Pages: [1]
« previous next »