Author Topic: Selling some parts off of the 352....  (Read 768 times)

0 Members and 1 Guest are viewing this topic.

blykins

  • Hero Member
  • *****
  • Posts: 4120
    • View Profile
    • Lykins Motorsports
Selling some parts off of the 352....
« on: July 17, 2021, 09:37:40 AM »
I'm done with dyno'ing and will be pulling the 352 down.

The rods are already sold, but I plan on selling some other parts:

1.  Leftover cam, custom Comp solid roller, 256/266 @ .050", 109 LSA, .686"/.706" gross valve lift.  One dyno session only (2 pulls).  Will selling for $225 + shipping.

2.  Kevko deep front sump oil pan and pickup.  Pan is painted Ford blue, has a couple of paint scrapes.  $150 + shipping for pan and pickup.

3.  Comp Cams solid roller lifters.  Dyno time only.  $150

4.  Custom Racetec pistons.  These are for a 352 block with 6.490" rods.  Flat tops, 6cc valve reliefs, 1.920" compression height, 1mm/1mm/2mm.  $250 + shipping. 

All of these items will be for sale when I get the engine disassembled (I'm planning for next weekend to do that).  If in the event that anything is damaged upon inspection and I don't feel comfortable selling, then I'll make that known.  At this point, if anyone is interested in any of the parts, just speak up and put your name down and I'll contact you when it's all apart.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

oldiron.fe

  • Jr. Member
  • **
  • Posts: 45
    • View Profile
Re: Selling some parts off of the 352....
« Reply #1 on: July 17, 2021, 11:22:16 AM »
                                                                                                                                                                  if you get this message i would take the lifters -i will call next week re other items  thank you john                                                                                                                                                                                                                           
66' Fairlanes 427 (08/26/67- present)
66/67' Fairlanes
70' Mustang Fastback
66' Dually

My427stang

  • Hero Member
  • *****
  • Posts: 3604
    • View Profile
Re: Selling some parts off of the 352....
« Reply #2 on: July 17, 2021, 12:51:28 PM »
I'll take the pan and pickup...talk to you off line
---------------------------------
Ross

- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

winr1

  • Guest
Re: Selling some parts off of the 352....
« Reply #3 on: July 17, 2021, 03:48:06 PM »
What bore are the pistons and how much do they weigh please



Ricky.

blykins

  • Hero Member
  • *****
  • Posts: 4120
    • View Profile
    • Lykins Motorsports
Re: Selling some parts off of the 352....
« Reply #4 on: July 17, 2021, 06:48:59 PM »
550g with a 130g pin.  4.040" bore.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

winr1

  • Guest
Re: Selling some parts off of the 352....
« Reply #5 on: July 18, 2021, 01:09:10 AM »
Forgot to ask .... forged ??

.... that is light with that high of a comp. height

My 65 F100 352 has the original block but needs a bore .. got me thinkin  ...


How light of a piston can you get with a 1.692 comp. height at 4.09 bore ??



Ricky.

blykins

  • Hero Member
  • *****
  • Posts: 4120
    • View Profile
    • Lykins Motorsports
Re: Selling some parts off of the 352....
« Reply #6 on: July 18, 2021, 05:54:12 AM »
Forgot to ask .... forged ??

.... that is light with that high of a comp. height

My 65 F100 352 has the original block but needs a bore .. got me thinkin  ...


How light of a piston can you get with a 1.692 comp. height at 4.09 bore ??



Ricky.

Yes, forged.   Custom pistons are only available in forgings or billets.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

blykins

  • Hero Member
  • *****
  • Posts: 4120
    • View Profile
    • Lykins Motorsports
Re: Selling some parts off of the 352....
« Reply #7 on: July 18, 2021, 05:58:21 AM »
I got her torn down last night.  Everything looked great. 

Rods, oil pan/pickup, and lifters are spoken for.  Everything else is still for sale. 

Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

gdaddy01

  • Hero Member
  • *****
  • Posts: 537
    • View Profile
Re: Selling some parts off of the 352....
« Reply #8 on: July 20, 2021, 01:15:26 PM »
what are your plans for the block ?

blykins

  • Hero Member
  • *****
  • Posts: 4120
    • View Profile
    • Lykins Motorsports
Re: Selling some parts off of the 352....
« Reply #9 on: July 20, 2021, 05:01:51 PM »
I'm not ditching the 352, just tearing down to bump the compression up, change rods, do a little more headwork, and change oil pans.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

gdaddy01

  • Hero Member
  • *****
  • Posts: 537
    • View Profile
Re: Selling some parts off of the 352....
« Reply #10 on: July 20, 2021, 08:38:40 PM »
glad to hear that , very interesting to read