My 65 F100 has the wire that holds the clutch release fork to the bellhousing
Were the 65 cars the same way ??
I wish to convert the 65 F100 to a later fork with the tang on the fork
.......................................................................
Got this from NumberDummy:
The C3AZ7515C is the wire style fork. D0TZ7515A is the later style Train was talking about.
And the fork pivot bracket was part number C8AZ7522A. Replaced by C8AZ7522B. Discontinued. But the D0TZ7515A has a divot in it for the rod to PUSH it
...
Hey guys. I can help here. OP, look at the back of your clutch fork. If there is a tongue shaped spring on it that fits in to a rectangular hole in the trunnion then it is fork number D0TZ7515A and trunnion number C8AZ7522A. If there are opposing holes in the fork for that crazy glorified piece of coat hanger wire number C6AZ7562A to attach it to the trunnion and be an anti rattle spring,then it is B9AZ7522A trunnion and C3AZ7515C fork.
...
Any have the parts and wish to sell ??
Finally getting time to redo the old truck ...
Ricky.