Updated 7/13/20: Just finished all the machining on all the remaining valve covers. I will not have any more for a while after these are gone. I have updated the list below with the
8 7 pairs I have left. Any questions, please let me know. Thanks, Jay
Normally I take "blems" like these parts to the FE Reunion and sell them there, but since there hasn't been one this year (yet), I'm putting these up for sale on the site. The pictures below are representative of the parts that I'm selling. I'm offering a substantial discount on all these parts, in most cases $100 off the normal price, because I'm trying to clear out space for the coming cylinder head and intake manifold castings.
The valve cover caps shown in most of the photos are for use with a screw-in breather; I like the ones by S&B, shown at this link on the Summit Racing web site:
https://www.summitracing.com/parts/sbf-26-1524However, I can substitute plain caps, a cap machined for a PCV grommet (grommet included), or a cap machined for a #12 AN fitting if you would prefer. All valve covers come with the bolts required to install them.
I still offer machining for master cylinder and power booster clearance at no extra charge for these valve covers. I have yet to find a car that these will not fit, with the proper clearancing. Also, I can still offer custom engraving on the plain (not finned) valve covers, such as block letters with your cubic inches, "FE", "FE Power", a Cobra Jet script, a Fairlane script, whatever. Clearancing or custom engraving will add 3-4 weeks to delivery time. Any custom engraving will add a charge of $60 to $125 (depending on what needs to be engraved), and the valve covers must be paid for in advance, but it's no problem for me to engrave most things on these covers.
Shipping for any of these valve covers to the continental US is $29; outside of the US, contact me and I can quote a shipping cost. I can accept payment via Paypal, credit cards, or personal checks. I will not accept returns on these covers. Any questions, please let me know.
The valve covers shown below are my part number 17004, fitted with two caps for breathers.
I have one pair available; Sorry, sold out. Normal price for these is $359 for the pair; scratch and dent sale
$259 each pair:
The valve covers shown below are my part number 17006, fitted with two caps for breathers. I have
four three one Sorry, sold out. Personally I prefer these covers, because it gets the breathers up at the front of the engine, rather than at the rear, where oil mist from the breather could be a bigger problem. Normal price for these is $359 for the pair; scratch and dent sale
$259 each pair:
The valve covers shown below are my part number 17006F, fitted with two caps for breathers.
I have one pair available, Sorry, this pair is sold. normal price is $409 for the pair, scratch and dent sale
$309 for the pair. Also, I do have one plain pair, finned with no holes, still available. Looks just like the pictures below, but no holes for breathers. Normal price for those is $339 for the pair;
scratch and dent sale $239 for the pair:
Sorry, this pair is sold.
