Author Topic: Carb gurus chime in  (Read 978 times)

0 Members and 1 Guest are viewing this topic.

sixty9cobra

  • Sr. Member
  • ****
  • Posts: 274
    • View Profile
Carb gurus chime in
« on: April 26, 2019, 09:07:36 AM »
I have a 428 stroked to 464 solid roller, duration at .050  266.00 intake, 272.00 ex. .690, .700 110.0 center line 110 lobe separation. 850 Holly hp 80 jets pri 88 sec, 10.5:1 compression, Hooker 1 3/4, 3" exhaust. Timing 35 locked. Victor intake ported to Barrys cnc ported heads. Idles about 1200 at 13.5afr cruises between 2000 and 3000 at 11:1 afr.  in fourth gear from 3000 to 6500 foot to the floor it ranges 13.5:1 to 14.2 at 6500. Seems pretty good except 2-3000 is very fat. Should I just go down on the primary 2 sizes or am I over looking something?