« previous next »
Pages: [1]

Author Topic: Need a ported Victor or Trick Flow intake  (Read 1260 times)

0 Members and 1 Guest are viewing this topic.

6667fan

  • Hero Member
  • *****
  • Posts: 727
  • Every Second Counts
    • View Profile
Need a ported Victor or Trick Flow intake
« on: April 10, 2019, 07:17:07 PM »
Looking to save some time which is of the essence as trying to assemble 482 for FE R & R. If someone had one that was already massaged it would be helpful.
Thanks,
JB
Four 13 six nine 5 3103.
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.68@125.71 1.56 60’

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7426
    • View Profile
    • FE Power
Re: Need a ported Victor or Trick Flow intake
« Reply #1 on: April 10, 2019, 08:54:29 PM »
I have a Victor that is port matched medium riser heads, if that's what you're looking for. 
Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

6667fan

  • Hero Member
  • *****
  • Posts: 727
  • Every Second Counts
    • View Profile
Re: Need a ported Victor or Trick Flow intake
« Reply #2 on: April 11, 2019, 06:50:39 AM »
Jay,
Give me a call please when you are vertical. I’m in the East.
413-six 95 three 103

Thanks,
JB
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.68@125.71 1.56 60’

6667fan

  • Hero Member
  • *****
  • Posts: 727
  • Every Second Counts
    • View Profile
Re: Need a ported Victor or Trick Flow intake
« Reply #3 on: April 11, 2019, 01:13:07 PM »
I have found a suitable intake.
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.68@125.71 1.56 60’
Pages: [1]
« previous next »