Author Topic: WTB - 2 "CJ" style/spec hyd cams  (Read 1233 times)

0 Members and 1 Guest are viewing this topic.

ntheogen

  • Sr. Member
  • ****
  • Posts: 254
    • View Profile
WTB - 2 "CJ" style/spec hyd cams
« on: February 11, 2019, 10:49:52 PM »
I need a couple cams for two CJ engines, looking for something just a bit hotter than stock with good street manners and a nice sound.

Let me know what you might have.

Thanks

Jack 540-664-for four one ate

Rory428

  • Hero Member
  • *****
  • Posts: 998
    • View Profile
Re: WTB - 2 "CJ" style/spec hyd cams
« Reply #1 on: February 12, 2019, 02:38:45 AM »
On a stock 428 CJ, I like the Comp Cams 268H. Idles nice and low with good vacuum, works fine with the stock torque convertor, nice street manners and decent gas mileage. I had a 268H in my otherwise stock 69 Cobra Jet 69 Mach1, it ran 13.3 ET @102 MPH, leaving the shifter in Drive, shifting at 5400 RPM, with 3.50 gears, on 14" normal street radial tires. I have 2 new in the box 268H cams for $150.00 US, plus shipping. I also have 1 set of Comp hydraulic lifters for another $75.00, if interested.
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. 428 Cobra Jet, 4 speed Toploader. 12.54@ 108 MPH

ntheogen

  • Sr. Member
  • ****
  • Posts: 254
    • View Profile
Re: WTB - 2 "CJ" style/spec hyd cams
« Reply #2 on: February 12, 2019, 12:48:38 PM »
Exactly what I'm looking for. I'll take it all, give me a call at your convenience.

Thanks,

Jack 540-664-for four one ate