« previous next »
Pages: [1]

Author Topic: Quench  (Read 1820 times)

0 Members and 1 Guest are viewing this topic.

centredautomag

  • Jr. Member
  • **
  • Posts: 40
    • View Profile
Quench
« on: December 28, 2018, 12:27:43 AM »
Install piston tonight, they are .011 down and I have 1020gasket ,they hare.041 thick so .051 of
Quench . Is it ok ,or should order gasket that are thinner to get closer to .40.
Thanks for all the info. You gave me so far. Marc.
Logged

wowens

  • Sr. Member
  • ****
  • Posts: 445
    • View Profile
Re: Quench
« Reply #1 on: December 28, 2018, 06:56:12 AM »
I would run it. .040 quench is recommended if you are optimizing everything but .051 in my book is good.
Logged
Woody

My427stang

  • Hero Member
  • *****
  • Posts: 4206
    • View Profile
Re: Quench
« Reply #2 on: December 28, 2018, 08:19:02 AM »
I agree, I like to crowd it as much as I can, up to about .055 is still working for you.  What's your compression, cam, and type of head you are running?
Logged
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

centredautomag

  • Jr. Member
  • **
  • Posts: 40
    • View Profile
Re: Quench
« Reply #3 on: December 28, 2018, 09:10:26 AM »
The way it is now comp. would be 9.64 with the calculator I have.
Brent ad a cam made for me here are the spec.

lift               .579 in      .586 ex
 dur.@ .006  299           311
timming@.050  open int 18 btdc  close46abdc
                               ex  61bbdc          9atdc
icl  104
duration @.50   in 243    ex249
lobe separation  110.0
the heads are cnc ported Pond and come from Brent. thanks Marc.
Logged

Barry_R

  • Hero Member
  • *****
  • Posts: 1984
    • View Profile
    • Survival Motorsports
Re: Quench
« Reply #4 on: December 28, 2018, 04:44:16 PM »
run it
Logged
Pages: [1]
« previous next »