WTB standard 390 block

[turbohunter]

Hi guys
Not for me but my brother is looking for a standard block for his truck project. Standard deck as well as bores.
If you’ve got one and would like to part with it I’ll hook you both up.
He lives between Iowa and Nashville so he can pick up over a large area.

[Drew Pojedinec]

C4AE std bore
D4TE std bore and crack checked.
$250 each

[turbohunter]

Ok Drew I’ll pm you.

[428kidd]

Im in the Cookeville TN area, just out side nashville, have several that are complete. He is welcome to come look and pick one out. Thanks Lance

[Drew Pojedinec]

Marc. It won’t hurt my feelings at all if he buys that local one instead of shipping mine.

[turbohunter]

I’ll tell him about it.
You’re both very kind, thank you.
Lance by complete do you mean complete short blocks or ?
He has a rotating assembly which is why he needs a standard block.

[428kidd]

Drew , and I sure wasn't trying to cut in on you at all .Was just offering up a possible local offer .If he would rather take Drew's as he posted first I will back out. If not ,  I have several complete engines if he needs that. I can also tear one down if a block is all that is needed. If Drew's have been cleaned and checked at that price it is a super good deal!

[BigBlueIron]

I have one if your still looking. Originally a 360 virgin with exception of a few oil mods, should clean up at .03. I have ran it so no known major defects. Located in south central IA

[turbohunter]

Ryan and Lance got it done.
Thanks for the help guys.