« previous next »
Pages: [1]

Author Topic: WTB SBF 302 intake  (Read 3660 times)

0 Members and 1 Guest are viewing this topic.

Drew Pojedinec

  • Hero Member
  • *****
  • Posts: 2141
    • View Profile
WTB SBF 302 intake
« on: July 25, 2018, 02:16:51 PM »
So Ronin is getting his permit when I get home next time.

We've been driving his truck around a little and the 2v Autolite carb needs a rebuild.  I've got probably 100 1850's on the shelf.  I'd rather have him rebuild one of these as I have so many Holley parts laying around, in the future while I'm gone he can grab a gasket or accelerator pump as needed, etc.

I told him for his birthday I'd get him a 4v 302 intake and teach him to rebuild the 1850 or even one of the 390cfm carbs I've got laying around.

Not looking for anything fancy, It's just a stock junky engine, aluminum would be super nice just because I hate lifting heavy stuff.  It can be ugly, we can soda blast it if needed.
I figure someone here probably has an intake with some spiders ready to hatch that has been on the shop floor for a decade.
To narrow down the field, lets put a $125 shipped budget out there.


Thanks,
Drew
Logged

Fordman

  • Full Member
  • ***
  • Posts: 158
    • View Profile
Re: WTB SBF 302 intake
« Reply #1 on: July 26, 2018, 03:20:46 PM »
Drew....I have a stock '85 mustang 4V aluminum intake. depending on shipping I also have an edelbrock performer, Chinese polished rpm style intake as well but like I said shipping can be brutal these days. My email is classics4everyone at yahoo.ca
Thanks...John
Logged

Stangman

  • Hero Member
  • *****
  • Posts: 1852
    • View Profile
Re: WTB SBF 302 intake
« Reply #2 on: July 26, 2018, 11:27:39 PM »
jegs has a 302 rpm for 139 brand new, a little more than you said but new. Free shipping.
Logged

Drew Pojedinec

  • Hero Member
  • *****
  • Posts: 2141
    • View Profile
Re: WTB SBF 302 intake
« Reply #3 on: July 27, 2018, 07:26:58 AM »
Yeah that is why I set that limit
Logged

cattleFEeder

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Re: WTB SBF 302 intake
« Reply #4 on: July 27, 2018, 12:58:09 PM »
Logged
Remember, RPM is your friend

urchinhead

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
Re: WTB SBF 302 intake
« Reply #5 on: July 29, 2018, 09:41:56 AM »
I am interested in buying a new one and sending it your way in exchange for some future plating work, if that appeals to you. The only small block manifolds in my garage are fuel injected.
Logged
1964 Galaxie 500 Convertible, drivetrain on stand
1970 F100 Custom, 428 - body work and paint in progress

Drew Pojedinec

  • Hero Member
  • *****
  • Posts: 2141
    • View Profile
Re: WTB SBF 302 intake
« Reply #6 on: July 29, 2018, 11:20:56 AM »
If that is the case Mike, I’ll just buy a new one and we’ll work out the details later
Logged

urchinhead

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
Re: WTB SBF 302 intake
« Reply #7 on: July 29, 2018, 12:41:10 PM »
I can use my Discover points to get one, just give me a heads up what you might want. I’m going through the remaining Galaxie linkage right now, and have been tinkering with some truck parts this weekend.
Logged
1964 Galaxie 500 Convertible, drivetrain on stand
1970 F100 Custom, 428 - body work and paint in progress

wayne

  • Sr. Member
  • ****
  • Posts: 370
    • View Profile
Re: WTB SBF 302 intake
« Reply #8 on: July 30, 2018, 05:58:01 PM »
I got a iron 4v or a 84 mustang gt  for 25 plus shipping.
Logged

cattleFEeder

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Re: WTB SBF 302 intake
« Reply #9 on: July 30, 2018, 07:41:07 PM »
Logged
Remember, RPM is your friend
Pages: [1]
« previous next »