whats everybodies favorite intake gasket now days

[e philpott]

the dreaded intake gasket question , lol ..... getting ready to instal my 2x4 intake medium riser intake with edelbrock heads ... forum search on the other web site are all old from 2002 and back , seems like Victor reinz was the one recomended back then , curious if thats still true

thanks , Eric

[afret]

Metal reinforced Felpro 1247S-3 for stock Edelbrocks:



Cometic for ported heads:

[e philpott]

thanks , making a road trip to Jegs tomorrow if its raining

[drdano]

I like the Victor Reinz, but they are hard to get here.  I usually get a few sets off RockAuto to have on hand.

[Drew Pojedinec]

I recently used the Edelbrock Gaskets.
Everything sealed up well, but they do not lock in place, so after setting the intake you might need to do a little gasket shifting.  Frustrating to say the least.  Despite them working fine I doubt I'd use them again.

[jayb]

Hate to be boring, but the plain old Mr. Gasket 202As are my favorites.  They are just composition gaskets, but they lock in place and have always sealed up well for me.  I must have bought over 100 sets when I was doing my intake testing LOL!

[ScotiaFE]

oops wrong spot.