I'm rebuilding my stroked FE with a Hyd Roller from Brent and have decided to go non adjustable rockers on it.
The cam is just under .600 lift and requires 160lbs on seat.
I've been on the look out for stock rockers for a few months now (after scraping them for years) . I find many of them to have good valve tip surfaces but no internal groove.Then others have the groove but noticeable wear on the valve tip end.
So does a good rocker need the groove?
The lack of tip wear seems like a no brainier but the number of good tips with no groove in my small collection has me questioning the groove.
