Dedicated to Building and Racing the Ford FE Engine
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
SMF - Just Installed!
Home
Help
Search
Login
Register
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
Need to find a good machine shop
« previous
next »
Print
Pages: [
1
]
Author
Topic: Need to find a good machine shop (Read 2570 times)
0 Members and 1 Guest are viewing this topic.
c9zx
Jr. Member
Posts: 25
Need to find a good machine shop
«
on:
July 04, 2012, 09:56:58 AM »
somewhere reasonably close to Indianapolis IN. A friend needs to have a BT intake milled to fit properly on his zero decked 427. Can anyone recommend a competent shop? Thanks for the help, Chuck
Logged
machoneman
Hero Member
Posts: 3856
Re: Need to find a good machine shop
«
Reply #1 on:
July 09, 2012, 07:36:55 PM »
Chuck, Indy Cylinder Heads is an very competent NHRA winning shop right in your area.
http://www.indyheads.com/
But I have no idea if they would handle an FE intake due to tooling/fixtures set up as they pretty much only do Dodge/Plymouth 383-426hemi-440 engines. May be worth a call. Barry R in/near Detroit, MI is the next closest. He can be found here:
http://www.survivalmotorsports.com/
«
Last Edit: July 09, 2012, 07:49:59 PM by machoneman
»
Logged
Bob Maag
Print
Pages: [
1
]
« previous
next »
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
Need to find a good machine shop