Hi guys,
Is the fuel pump eccentric on the cam essential if I am planning to use an electric fuel pump on an EFI system?
Reason I ask is I have just installed a Comp cam and am using a Cloyes gear set. The gear pin sit just proud of the cam gear and does not allow the tab on the two piece eccentric to sit in place.
Should I shorten the pin so that the eccentric will fit?
Or, should I shorten the pin so that the cam bolt washer sits flat against the gear and forget the eccentric altogether?
Sorry if this is a stupid question. I've tried searching and googling with no result.
Cheers