Author Topic: Motorcraft Distributor Dual Point Plates  (Read 5203 times)

0 Members and 1 Guest are viewing this topic.

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Motorcraft Distributor Dual Point Plates
« on: December 06, 2016, 11:01:21 AM »
I'm winding down the Oldcrabs website and not putting any new parts on there.

Meanwhile have some NOS point plates to sell, but not taking paypal anymore.

1. Bare point plate with screws and aluminum adapter $45

2. Point plate with screws, USA made condenser and points, and aluminum adapter $60

3. Point plate with screws. USA made condenser and points, aluminum adapter, wiring, advance springs and instructions for installing springs $85

Can ship these; $7 for Priority small flat rate box, its possible to put multiple plates in one box. No Paypal or credit cards.

Have one point plate with screws but no adapter plate for $30.

Note - adding this later:  I have a quantity of five of 1 and 2.  And three of 3.  Free shipping if you buy two or more of any combination.
« Last Edit: January 04, 2017, 03:46:46 PM by babybolt »

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #1 on: April 09, 2017, 07:56:18 AM »
Still have some of these point plates, if you a member here, make an offer.

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #2 on: May 06, 2017, 05:42:38 PM »
Sold most of the plates, but found a bunch of bare NOS plates still sealed in the Motorcraft bags.  DB_18  COAF-12152-A.  $28 each, $50 for two, $80 for four.  Priority small flat rate box shipping.

Adding pictures of what's left, unless I find more hiding in boxes:
« Last Edit: May 09, 2017, 10:54:30 AM by babybolt »

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
68 390 GT, 428 PI and 427 GT-E PCV valves
« Reply #3 on: May 09, 2017, 10:34:40 AM »
Updated
« Last Edit: December 03, 2017, 12:32:46 PM by babybolt »

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #4 on: June 05, 2017, 08:17:30 AM »
All that is left is the plates with points, condensor, and adapter as shown in the bottom of the last picture above.  These don't have the original Motorcraft bags.    $55 plus shipping (Priority small rate box plus insurance).  Can ship multiple plates per box.  Free PCV valve with each point plate. 

SOLD all of the points plates until I open more boxes of ignition parts in storage this fall.
« Last Edit: August 19, 2017, 08:58:27 AM by babybolt »

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #5 on: December 03, 2017, 12:38:06 PM »
Found some more NOS plates, #1 and #2 as above, same as in pictures in first listing:

1. Bare point plate with screws and aluminum adapter, in C0AF-12152-A Motorcraft bag  $45

2. Point plate with screws, USA made condenser and points, and aluminum adapter $60

Free shipping with purchase of two or more. 

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #6 on: March 10, 2019, 11:50:14 AM »
Looking through my stuff and found one more bare dual point plate with aluminum adapter and screws.  $45 plus shipping.

winr1

  • Guest
Re: Motorcraft Distributor Dual Point Plates
« Reply #7 on: March 10, 2019, 03:24:37 PM »
Hey :-)


Any stuff for single point distributors ??



Ricky.

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #8 on: March 11, 2019, 08:07:16 AM »
I probably do have single point parts but to actually go out and find one specific part is like finding an honest politician in Washington DC.

Leny Mason

  • Sr. Member
  • ****
  • Posts: 368
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #9 on: March 31, 2019, 10:31:07 AM »
I would like a plate and points and condenser, for an Fe non vacuum advanced distributor thanks Leny Mason 

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: Motorcraft Distributor Dual Point Plates
« Reply #10 on: April 01, 2019, 01:01:07 PM »
Hi Lenny, this is the only plate I have available right now.  It might be months before I find the energy to start looking through boxes of stuff again.