« previous next »
Pages: [1]

Author Topic: Powder coating question  (Read 5073 times)

0 Members and 1 Guest are viewing this topic.

country63sedan

  • Jr. Member
  • **
  • Posts: 96
    • View Profile
Powder coating question
« on: March 02, 2012, 09:00:26 PM »
I'm thinking about getting a do it yourself powder coating kit for stuff around here and since the wife needs a new stove anyway.......... ;D
  I was looking at the finned Ed valve covers in the shop, and they've got some gouges on the fins. Is there such a thing as "bondo" to be used under powder coating?  Thanks, Travis
Logged

machoneman

  • Hero Member
  • *****
  • Posts: 3859
    • View Profile
Re: Powder coating question
« Reply #1 on: March 02, 2012, 10:21:18 PM »
Sorry but no. If you plan to powder coat those gouged covers, you'll need to skip the Bondo and weld them instead, then finish grind them before the powder coat step instead.
Logged
Bob Maag

country63sedan

  • Jr. Member
  • **
  • Posts: 96
    • View Profile
Re: Powder coating question
« Reply #2 on: March 02, 2012, 10:47:34 PM »
I didn't figure there was such a thing, but thought I would ask anyway.  Thanks, Travis.
Logged

427Fastback

  • Hero Member
  • *****
  • Posts: 623
    • View Profile
Re: Powder coating question
« Reply #3 on: March 03, 2012, 12:59:34 AM »
Actually there is...My Harley friends have been useing JB Weld...You have to use the slow cure.You can not use the fast cure 5 min stuff.I asked a local powdercoater if he knew of this and he said yes and it does work...I have not personally done it.You may want to check with your local coaters.......Cory
Logged
1968 Mustang Fastback...427 MR 5spd (owned since 1977)
1967 Mustang coupe...Trans Am replica
1936 Diamond T 212BD
1990 Grizzly pick-up

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7583
    • View Profile
    • FE Power
Re: Powder coating question
« Reply #4 on: March 03, 2012, 01:23:32 AM »
Wow, another unexpected use for JB Weld!  That stuff is almost as good as duct tape...
Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

machoneman

  • Hero Member
  • *****
  • Posts: 3859
    • View Profile
Re: Powder coating question
« Reply #5 on: March 03, 2012, 07:18:34 AM »
Cool! Now that's one great idea that is much easier than welding. 
Logged
Bob Maag

country63sedan

  • Jr. Member
  • **
  • Posts: 96
    • View Profile
Re: Powder coating question
« Reply #6 on: March 03, 2012, 06:45:15 PM »
That's awesome. I'll look into that. If it holds up, it would make a cosmetic repair under powder coat so much easier.  Thanks, Travis.
Logged
Pages: [1]
« previous next »