« previous next »
Pages: [1]

Author Topic: SOLD 105 mirror block  (Read 4454 times)

0 Members and 1 Guest are viewing this topic.

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
SOLD 105 mirror block
« on: October 13, 2015, 09:06:36 AM »
360-390 D4TE (105 mirror) truck block. Extra main webbing,  All oil galley mods,  solid or hydraulic ready, full filled to 1/2" of deck, (drag race only) threaded and installed screw in core plugs, cross bolt mains added, aligned honed,  milodon main studs,  grooved lifter bores, fresh 4.140 bore, (.108 on #4 , .105 on #5 after boring, all others over .110), durabond coated cam bearings.
Will deliver up to 100 miles after payment, other wise pick up only unless buyer pays all shipping .. 
This is a good block, steel it at $700.00











Thanks to my wife for finding the sheet for me. This ofcourse is before the .090 bore. 
« Last Edit: December 18, 2015, 08:24:12 PM by fekbmax »
Logged
Keith.  KB MAX Racing.

GJCAT427

  • Hero Member
  • *****
  • Posts: 662
    • View Profile
Re: 105 mirror block
« Reply #1 on: October 14, 2015, 05:27:58 AM »
Hey Keith, is that the main cap you got from me I see in there?  By the way I compared the rockers to my NOS ones and there identical. Looks good, I thought about doing that to one of my 390 blocks, but just to many irons in the fire right now. Garry
Logged

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
Re: 105 mirror block
« Reply #2 on: October 14, 2015, 06:40:23 AM »
It sure is.. thanks again for the hook up.  8)
Logged
Keith.  KB MAX Racing.

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7406
    • View Profile
    • FE Power
Re: 105 mirror block
« Reply #3 on: October 14, 2015, 08:01:20 AM »
Looks like a great deal to me.  You don't have sonic data on the upper parts of the bores, by chance?
Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
Re: 105 mirror block
« Reply #4 on: October 14, 2015, 11:32:25 AM »
I'm sure I have that info somewhere.  Finding it is the real issue.  However I have no prob re checking the block at the top of each cylinder and sharing the data. Working on the eastern shore this week so I couldn't do that till Saturday. 
Logged
Keith.  KB MAX Racing.

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
Re: 105 mirror block
« Reply #5 on: October 24, 2015, 03:20:10 PM »
pleasantly surprised, even better results than i expected. each cylinder was checked twice at all 4 points 1" below deck by me. I have done all i can do with the resources i have.

Logged
Keith.  KB MAX Racing.

ChiefDanGeorge

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: 105 mirror block
« Reply #6 on: October 26, 2015, 04:37:43 PM »
I've been searching for a block to do a build for my '62 Colony Park. This seems like it would be a good candidate. I'm no expert in what machining should be done to prep a block for a rebuild, but would it be safe to say this one is ready to go?

Thanks,

Dan
Logged

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
Re: 105 mirror block
« Reply #7 on: October 26, 2015, 08:32:49 PM »
It's a very good block and ready to go. Everything has been done, however like I said it block filled and would be race only.
Logged
Keith.  KB MAX Racing.

fekbmax

  • Hero Member
  • *****
  • Posts: 1458
    • View Profile
Re: SOLD 105 mirror block
« Reply #8 on: December 18, 2015, 08:24:59 PM »
SOLD .
Logged
Keith.  KB MAX Racing.
Pages: [1]
« previous next »