Author Topic: FE with a fepower net adapter, torker and EFI first drive  (Read 5618 times)

0 Members and 1 Guest are viewing this topic.

newfalconowner

  • Guest
FE with a fepower net adapter, torker and EFI first drive
« on: October 04, 2015, 04:24:40 PM »
after 8 yrs of working on it off and on,, it moves under its own power...



video here

https://www.youtube.com/watch?v=KrYgEz06V2M

rhinosoft

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #1 on: October 04, 2015, 04:38:23 PM »
Congratulations, a great feeling.

Graeme 8)

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7406
    • View Profile
    • FE Power
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #2 on: October 04, 2015, 05:15:05 PM »
Awesome, Rick, congrats!
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

turbohunter

  • Hero Member
  • *****
  • Posts: 2509
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #3 on: October 04, 2015, 05:21:45 PM »
Congrats Rick. What a great feeling.
Marc
'61 F100 292Y
'66 Mustang Injected 428
'66 Q code Country Squire wagon


Bolted to Floor

  • Hero Member
  • *****
  • Posts: 596
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #4 on: October 04, 2015, 05:26:59 PM »
I'm jealous. Mine can't do that. :)
John D -- 67 Mustang 390 5 speed

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #5 on: October 04, 2015, 07:37:42 PM »
So close to the street. Licensed or not, I would have HAD to take it around the block. That isn't enough of a test drive for me. :) Good job.
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

country63sedan

  • Jr. Member
  • **
  • Posts: 96
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #6 on: October 04, 2015, 07:48:24 PM »
I'd have to build an engine, install it, do a bunch of  wiring and plumbing, then find four tires that hold air to even come close to that. I'm jealous also.  :) I usually don't say much, but I have been watching your whole build. Congrats. Later, Travis

newfalconowner

  • Guest
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #7 on: October 04, 2015, 08:15:04 PM »
I would of went down the block, but my driver seat isn't bolted to the floor and door doesn't latch all the way, and no lower bolts on the valve covers (why the motor smoked). next weekend, weather permitting, is a car show down the road.. no windshield but I will take it :)

57 lima bean

  • Guest
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #8 on: October 06, 2015, 09:23:05 AM »
Falcons are  8).This was my torque monster at 76 pft.Have a good time with it!

newfalconowner

  • Guest
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #9 on: October 17, 2015, 03:36:15 PM »
gave it a quick black cover up for over the winter






newfalconowner

  • Guest

fastback 427

  • Sr. Member
  • ****
  • Posts: 442
    • View Profile
Re: FE with a fepower net adapter, torker and EFI first drive
« Reply #11 on: February 20, 2016, 11:13:03 PM »
Sounds good!!! Sure shakes the video camera. That thing is loud enough to wake the dead. (pun intended).
Jaime
67 fastback 427 center oiler 428 crank Dove aluminum
top end toploader
67 fairlane gta cross bolted 12:1 390 Dove aluminum top end c6 3600 stall
65 falcon straight axle project
67 mustang coupe project
76 f350 dually 390 mirror 105 4bbl 4spd
74 f100 xlt 390 c6 factory ac