Author Topic: Leftover project stuff  (Read 2864 times)

0 Members and 1 Guest are viewing this topic.

My427stang

  • Hero Member
  • *****
  • Posts: 3957
    • View Profile
Leftover project stuff
« on: September 20, 2015, 08:25:23 AM »
We have leftover parts from the hot rod F100 build, all parts are in Omaha, NE.

- One full set of Harland Sharp FE rockers, bushed not needles, they use ball and cup pushrods. On Precision Oil Pump shafts, with POP end stands. One rocker has a nick in it from a stuck valve guide that let the pushrod jump off the adjuster then hit the body. 600.00 for the set. I'd run the marked rocker in a heartbeat, but single rocker is about 60 bucks.

- One RUG-AT1 close ratio Toploader, originally for 351 Torino, fits FE truck bell perfectly. Unknown long term history, but he has been running the tranny daily for the past 6 months. No leaks, shifts great, no noises, nothing wrong with tranny, not painted, just looks like used Toploader. Has complete Hurst shifter, swapped short Indy handle onto Toploader because the Hurst handle fit truck better for TKO conversion. 700.00 with shifter.

- One HEH-CL wide ratio FE Toploader, 390 Fairlane, unknown history, needs FE car bell for use behind FE, comes with used shifter, looks spotless inside, shifts well on the bench, painted and looks like recent rebuilt, but haven't had it in a vehicle. 650.00 with shifter.

Buyer pays shipping from 68133, would love local pickup for trannies if available. I have one Tremec box for whichever tranny goes out the door first.
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

427Fastback

  • Hero Member
  • *****
  • Posts: 604
    • View Profile
Re: Leftover project stuff
« Reply #1 on: September 20, 2015, 12:38:11 PM »
Hey Ross..I posted on the FE forum that I would take the rocker stuff....Cory...(coryellwyn@hotmail.com)
1968 Mustang Fastback...427 MR 5spd (owned since 1977)
1967 Mustang coupe...Trans Am replica
1936 Diamond T 212BD
1990 Grizzly pick-up

My427stang

  • Hero Member
  • *****
  • Posts: 3957
    • View Profile
Re: Leftover project stuff
« Reply #2 on: September 20, 2015, 04:25:19 PM »
Got it, thanks Cory!

Rockers are spoken for, trannies still up for grabs.
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

BB-63

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: Leftover project stuff
« Reply #3 on: November 01, 2015, 07:18:36 PM »
Will the HEH-CL work with a 1963 Galaxie 500 (390 FE)? - Garrett

My427stang

  • Hero Member
  • *****
  • Posts: 3957
    • View Profile
Re: Leftover project stuff
« Reply #4 on: November 02, 2015, 07:44:58 PM »
Sorry I didn't update these, the HEH-CL is gone, got a deposit on the RUG-A1

FYI, the HEH-CL would not have been correct for the car
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch