Free stuff for people that don't wanna buy anything!

[Pentroof]

Pulled a running 360 from my 1970 F100. Motor has evidence of a reman. on top. No sludge at all.
Carb has a Holley reman. tag and was freshened by me a year ago with gaskets, float, etc. Has kickdown linkage (even though truck was a manual). Bolt on ready.
Heads, intake, Autolite 2100, exhaust manifolds and 3 speed manual all up for grabs. Otherwise, calling my local Craigs scrap metal lurker. Only keeping the block.
I think I still have the air cleaner too...oh, and a couple water pumps

text for pics, if you wish 804-three|nine|nine-246two

Richmond, VA area

[Pentroof]

Being picked up for scrap later today.

[chilly460]

Just happened to look at this, I'm actually in Richmond as well.  I'd take the heads and trans if you're still offering

[Pentroof]

Just happened to look at this, I'm actually in Richmond as well.  I'd take the heads and trans if you're still offering

Sorry, brother. Once I posted they were being scrapped, I didn't check back in.

[FERoadster]

Even though I'm a long way away  from anyone I've got parts from about 20 FE's, mostly heads, block plates, flex plates cranks rods, pistons, intakes,and tons of bolts and accessory adapters. Probably 15 water pumps from the 60's and 70's. TC covers  &---------------- I head to the Denver area a couple of times a year with a F350 so could bring stuff that far and ship from there. Free but shipping. Some 1968-70 FE parts will need a bit of sale price.
I'm in Brookings Oregon, 7 miles north of the Calif. state line on the Pacific coast. 
PM me for info. Heading to Denver Sept. 1 for a month and again in May 2019. Michigan again in 2019 with engine blocksavailable. (FYI Barry R if you want some)

Richard >>> FERoadster

[mbrunson427]

I'm in Denver, come by my place! We're currently setting up my barn for car and parts storage and taking parts that are stored in 3 separate places and making just 1 storage place out of it. We'll be weeding through a ton of stuff and recycling anything that has no use (have a few cracked blocks), not sure what shape your stuff is in but I could weed through that stuff as well.

[FERoadster]

I'll be arriving Labor day and staying for a month. My wife's sister/BIL have a house just north of Franktown off Parker Rd.
I'll PM you with info. Will like to see what you have.

Richard

[mbrunson427]

Sounds good. PM me. I'm in the Fort Lupton area.

Stock class racer Neal Rhodes is in that Franktown area. If you brother in law is a car guy he may know him? Saw Neal's car at the Mile High's last weekend, he's running a late model cobra jet Mustang with a 352 FE in it I believe, in the GT class.

[FERoadster]

391 FT cast Iron TC cover and stuck waterpump for the same. Might also have the frame mount and the thermostat housing off a MD engine.
Can bring to the Denver area in September 2018
Just pay shipping from Zipcode 97415, Brookings Oregon

Richard >>> FERoadster

[FERoadster]

Anyone need a S code 4bbl intake? I've got 4 of them. Can bring to Denver or up and down Oregon & NorCal. for fuel cost
Various date codes. Free as this section state.

Richard

[chris401]

Gone

[mbrunson427]

Chris, I emailed you. Interested in finding out what that 352 engine is. Need to find a date code correct block for a 1960 hipo starliner.

[chris401]

Chris, I emailed you. Interested in finding out what that 352 engine is. Need to find a date code correct block for a 1960 hipo starliner.

I do not see anything in my e-mail. You will probably want to kick me like I wanted to when I got the 60. PM sent.

[chris401]

Some 65 Galaxie parts. The pointer and pulley are bent but fixable. Looks like they just bent the C5AE-D pulley where it goes into the balancer.

added some parts

[chris401]

Some 65 Galaxie parts. The pointer and pulley are bent but fixable. Looks like they just bent the C5AE-D pulley where it goes into the balancer.

Added a box of refubished OEM non adjustable rocker arms. About 250 with the tips resurfaced. About 32 unfinished and another 32-48 still on the shafts.