Author Topic: Free stuff for people that don't wanna buy anything! (Read 81197 times)

Drew Pojedinec · « **on:** May 05, 2015, 10:12:44 PM »

ok all my freebies have been given away.

Guess the thread served it's purpose in some way.

jayb · « **Reply #1 on:** May 05, 2015, 10:24:05 PM »

I like it! I'll make it a sticky. For anyone posting here, please update your messages so that people know when the parts you are trying to unload are no longer available.

Drew Pojedinec · « **Reply #2 on:** May 06, 2015, 02:05:12 PM »

Shady, you asked bout this:

Date code 3F25 so appropriate for a 63 galaxie

57 lima bean · « **Reply #3 on:** May 15, 2015, 01:45:30 PM »

410 flex plate....'mon get...TC area of Mn.

turbohunter · « **Reply #4 on:** May 15, 2015, 03:21:28 PM »

Drew those heads would be perfect for my son who is collecting parts for his first FE.
Or engine of any kind for that matter.
I would be happy to pay for anything it would take to get them to Spencer Iowa.
If you are close he could even road trip it.

mlcraven · « **Reply #5 on:** June 08, 2015, 09:53:51 PM »

Hopefully I'm doing this right...don't want to hi-jack Drew's excellent idea/thread.

Hood surplus to my requirements, comes with the alum leading edge trim strip. Free to the 1st person who wants to come get it and put it to its intended use (ie, on a car and not sold for scrap)

Full disclosure, its in good shape, but appears to have been in a v minor crunch at some stage on the pass leading edge but from 10 ft away isn't noticable and certainly isn't much more than a 'buff out' imperfection.

Drew Pojedinec · « **Reply #6 on:** June 09, 2015, 11:29:30 AM »

Nah man, anyone that has junk laying around, post it up. I meant to send all the stuff off but got sent offshore.... be back in two weeks and I'll get everything mailed out.

ScotiaFE · « **Reply #7 on:** June 17, 2015, 09:23:04 PM »

These appear to be a 70's High Riser intake gasket set, judging from the colours and thick dust.
Doubt I will fire up a HR anytime soon.

Of course you will have to pay the post, but they are free.

chris401 · « **Reply #8 on:** July 01, 2015, 07:36:59 PM »

Drew Pojedinec · « **Reply #9 on:** August 26, 2015, 11:52:55 AM »

Ordered Axle pivot bushings for my 76 F100 from Macs or some such place, it was 3-4 years ago.
I just tore my trucks front end apart and noticed they are the wrong ones. correct ones ordered, been too long to send back these old ones.

Moog: K8621
Ford: E4TZ-3B177B

Listing of applications:
http://www.summitracing.com/parts/mog-k8621/applications
Cost new, $60+
Cost to you? just a thanks will do.

Drew Pojedinec · « **Reply #10 on:** August 27, 2015, 11:54:16 AM »

2, cork c6 transmission pan gaskets. -Free
I use those fancy dual rubber/metal clad gaskets so I end up with alotta extra stock gaskets.

Same goes with c6 transmission pans.... I've got stock ones, heavy gauge ones, chrome ones with drain plugs etc, they are just collecting dust.
While on the c6 thread, I've got tons of extra c6 parts laying around, planetary gears, reverse hubs, stock drums, etc, if you need something lemme know.

**************edit****************
Drain pans and gaskets, all gone!

10w30dna · « **Reply #11 on:** September 12, 2015, 07:43:02 AM »

I have 7 NOS Ford C5AZ 6571 C , 427 ,Perfect Circle valve stem seals,small sleeve to install ,in the FoMoCo box. I hate to toss them out,give me a shout.Tim O'Connor tim@428cobrajetcars.com

babybolt · « **Reply #12 on:** November 13, 2015, 03:53:56 PM »

Free for forum members. 1961 Mercury 2dr hardtop body shell, came from Seattle, not restorable due to rust in the cowl and front door post area. Trunk full of parts. Hood is toast, I can remove it for you to make it easier to load. Some asshat stole the power steering and linkage so the front spindles rotate freely, they are rusty anyway. Has been sitting there on blocks for about 3 years so some rust is forming underneath. Floorboards aren't too bad, could be used as patch panels. Rear footwell area has been crushed upward by a fork lift operator. Located NW PA.

Note: Ran out of time, had to get a local junkyard to haul it away. So, its gone.

blueoval67 · « **Reply #13 on:** January 09, 2016, 05:42:16 PM »

machyoung · « **Reply #14 on:** February 23, 2016, 08:43:26 AM »

Free magazines. Wifey says they gotta go. I have numerous (200-300, maybe even 400) Super Ford, Mustang Monthly, Mustangs and fast Fords, etc. Most from the 90's and early 2000's. I have about 8-10 boxes of them. Probably too heavy to ship, but come get them. I am in SoCal; Temecula (home) and /or Fountain Valley (work). Email me. robert @ bartwood.com

rowdy58ford · « **Reply #15 on:** February 23, 2016, 11:21:53 AM »

I'll take them whats the shipping to 55040 Thanks Greg R graus19260@aol.com for my AA/S T-Bolt High riser
These appear to be a 70's High Riser intake gasket set,

ScotiaFE · « **Reply #16 on:** March 22, 2016, 08:41:01 AM »

Quote from: rowdy58ford on February 23, 2016, 11:21:53 AM

I'll take them whats the shipping to 55040 Thanks Greg R graus19260@aol.com for my AA/S T-Bolt High riser
These appear to be a 70's High Riser intake gasket set,

I believe you want the gaskets?
I tired your email and got no response back.
Howie
390fairlane@gmail.com

dozz302 · « **Reply #17 on:** March 29, 2016, 09:22:19 PM »

Hello I will take the high riser gaskets, let me know what shipping is to 20772.Thanks! eparocz@aol.com

ScotiaFE · « **Reply #18 on:** March 30, 2016, 07:23:57 AM »

Quote from: dozz302 on March 29, 2016, 09:22:19 PM

Hello I will take the high riser gaskets, let me know what shipping is to 20772.Thanks! eparocz@aol.com

Email sent.

rowdy58ford · « **Reply #19 on:** April 03, 2016, 09:11:25 AM »

I see you responded on the intake gaskets HR are they gone? 763 444 0141

stang8895 · « **Reply #20 on:** April 14, 2016, 08:27:14 AM »

I am looking for a pair of valve covers to fit my 1962 352 FE that have an oil fill hole in them. Preferably stock looking. I am changing my intake to a 4 barrel and the aftermarkets do not have an oil fill tube hole in them. Let me know. stang8895@hotmail.com Daniel.

mn67 · « **Reply #21 on:** September 22, 2016, 08:05:57 AM »

I ordered 1 too many sets. I am sure someone can use them, if you want to pay shipping, fine and if not that is OK too. Send a PM and I will get them out to you.
http://www.cjponyparts.com/timing-chain-cover-bolts-390-428-1968-1970/p/F503/

ericwevans · « **Reply #22 on:** October 20, 2016, 12:23:08 AM »

TRANSMISSIONS: I have a two transmissions that need a new home.

C6: TCI Streetfighter. The good, only 10,000 miles on it. The bad, when I originally got it installed had a problem where it would lose it's hydraulic prime sitting overnight. I should have pulled it but didn't and eventually found out it was an internal crack in the case in the pressure passage. It eventually propagated to the outside at the EPT plug. I was going to transfer all the internals to another case but decided to go with a manual instead. Free for FE Power members!

Cruise-O-Matic MX: original transs out of my 65 F-100. FE bellhousing, flange tailshaft. Free for FE Power members!

Drew Pojedinec · « **Reply #23 on:** May 09, 2017, 07:12:58 PM »

Eric where do you live

ericwevans · « **Reply #24 on:** May 10, 2017, 01:41:31 PM »

Hey Drew, I'm in Tempe, AZ.

gt350hr · « **Reply #25 on:** June 29, 2017, 05:35:04 PM »

Eric,
If you still have the C6 transmission available I could use it. I am in So Cal and could pick it up from you. I have a cherry case to transfer it over to. I understand if you have already committed to Drew, no problem.
Randy

urchinhead · « **Reply #26 on:** August 26, 2017, 06:30:31 PM »

Free Flowkooler water pumps and China brake drums for 1964 Galaxie. I bought these a few years ago when I was trying to get my car running after I first bought it. All brand new in the boxes.

I have one each of up to '65 and '65 on water pumps, and will not be using them.

All spoken for, 10/14/2017

thatdarncat · « **Reply #27 on:** September 03, 2017, 08:51:10 PM »

Free couple of stray FT heads. I don't know anything about them, they could be total junk, or not lol. I was forced to take them to get some other stuff. Probably not worth shipping and shipping is not included. I'm in Minnesota, although if anyone is interested I could drop them off along the Dragweek 2018 route. Likewise if anyone is interested in the valves, etc. let me know, I'd pull them if not stuck. Otherwise they'll get recycled some day. One is a C4TE-D the other looks to be D1 E-FA.

chris401 · « **Reply #28 on:** September 28, 2017, 07:24:52 PM »

chris401 · « **Reply #29 on:** October 02, 2017, 08:31:40 AM »

Thanks

Pentroof · « **Reply #30 on:** June 29, 2018, 09:50:42 AM »

Pulled a running 360 from my 1970 F100. Motor has evidence of a reman. on top. No sludge at all.
Carb has a Holley reman. tag and was freshened by me a year ago with gaskets, float, etc. Has kickdown linkage (even though truck was a manual). Bolt on ready.
Heads, intake, Autolite 2100, exhaust manifolds and 3 speed manual all up for grabs. Otherwise, calling my local Craigs scrap metal lurker. Only keeping the block.
I think I still have the air cleaner too...oh, and a couple water pumps

text for pics, if you wish 804-three|nine|nine-246two

Richmond, VA area

Pentroof · « **Reply #31 on:** July 10, 2018, 08:59:54 AM »

Being picked up for scrap later today.

chilly460 · « **Reply #32 on:** July 10, 2018, 09:02:53 AM »

Just happened to look at this, I'm actually in Richmond as well. I'd take the heads and trans if you're still offering

Pentroof · « **Reply #33 on:** July 13, 2018, 05:58:42 PM »

Quote from: chilly460 on July 10, 2018, 09:02:53 AM

Just happened to look at this, I'm actually in Richmond as well. I'd take the heads and trans if you're still offering

Sorry, brother. Once I posted they were being scrapped, I didn't check back in.

FERoadster · « **Reply #34 on:** July 25, 2018, 07:22:27 PM »

Even though I'm a long way away from anyone I've got parts from about 20 FE's, mostly heads, block plates, flex plates cranks rods, pistons, intakes,and tons of bolts and accessory adapters. Probably 15 water pumps from the 60's and 70's. TC covers &---------------- I head to the Denver area a couple of times a year with a F350 so could bring stuff that far and ship from there. Free but shipping. Some 1968-70 FE parts will need a bit of sale price.
I'm in Brookings Oregon, 7 miles north of the Calif. state line on the Pacific coast.
PM me for info. Heading to Denver Sept. 1 for a month and again in May 2019. Michigan again in 2019 with engine blocksavailable. (FYI Barry R if you want some)

Richard >>> FERoadster

mbrunson427 · « **Reply #35 on:** July 26, 2018, 11:42:12 AM »

I'm in Denver, come by my place! We're currently setting up my barn for car and parts storage and taking parts that are stored in 3 separate places and making just 1 storage place out of it. We'll be weeding through a ton of stuff and recycling anything that has no use (have a few cracked blocks), not sure what shape your stuff is in but I could weed through that stuff as well.

FERoadster · « **Reply #36 on:** July 26, 2018, 12:28:25 PM »

I'll be arriving Labor day and staying for a month. My wife's sister/BIL have a house just north of Franktown off Parker Rd.
I'll PM you with info. Will like to see what you have.

Richard

mbrunson427 · « **Reply #37 on:** July 26, 2018, 01:04:48 PM »

Sounds good. PM me. I'm in the Fort Lupton area.

Stock class racer Neal Rhodes is in that Franktown area. If you brother in law is a car guy he may know him? Saw Neal's car at the Mile High's last weekend, he's running a late model cobra jet Mustang with a 352 FE in it I believe, in the GT class.

FERoadster · « **Reply #38 on:** August 02, 2018, 09:16:41 PM »

391 FT cast Iron TC cover and stuck waterpump for the same. Might also have the frame mount and the thermostat housing off a MD engine.
Can bring to the Denver area in September 2018
Just pay shipping from Zipcode 97415, Brookings Oregon

Richard >>> FERoadster

FERoadster · « **Reply #39 on:** August 15, 2018, 11:41:03 PM »

Anyone need a S code 4bbl intake? I've got 4 of them. Can bring to Denver or up and down Oregon & NorCal. for fuel cost
Various date codes. Free as this section state.

Richard

chris401 · « **Reply #40 on:** October 27, 2018, 12:43:52 PM »

mbrunson427 · « **Reply #41 on:** October 29, 2018, 04:12:16 PM »

Chris, I emailed you. Interested in finding out what that 352 engine is. Need to find a date code correct block for a 1960 hipo starliner.

chris401 · « **Reply #42 on:** October 30, 2018, 10:04:58 PM »

Quote from: mbrunson427 on October 29, 2018, 04:12:16 PM

Chris, I emailed you. Interested in finding out what that 352 engine is. Need to find a date code correct block for a 1960 hipo starliner.

I do not see anything in my e-mail. You will probably want to kick me like I wanted to when I got the 60. PM sent.

chris401 · « **Reply #43 on:** November 17, 2018, 07:14:44 PM »

Quote from: chris401 on October 27, 2018, 12:43:52 PM

Some 65 Galaxie parts. The pointer and pulley are bent but fixable. Looks like they just bent the C5AE-D pulley where it goes into the balancer.

added some parts

chris401 · « **Reply #44 on:** November 22, 2018, 08:16:42 AM »

Quote from: chris401 on October 27, 2018, 12:43:52 PM

Some 65 Galaxie parts. The pointer and pulley are bent but fixable. Looks like they just bent the C5AE-D pulley where it goes into the balancer.

Added a box of refubished OEM non adjustable rocker arms. About 250 with the tips resurfaced. About 32 unfinished and another 32-48 still on the shafts.

AlanCasida · « **Reply #45 on:** December 13, 2018, 07:20:50 PM »

I have a pair of long finger drip rails and an early adjustable Isky rocker assembly, it allows you to use the stock hyd pushrods. If you want them, they are yours!

gt350hr · « **Reply #46 on:** December 14, 2018, 12:24:30 PM »

Alan ,
I'll take them as I have a special need for a "short set" like that .
Happy to pay all shipping costs . Will PM you now.

AlanCasida · « **Reply #47 on:** December 17, 2018, 07:22:11 PM »

These items have been claimed.

mn67 · « **Reply #48 on:** July 02, 2019, 02:04:46 PM »

New set of Morel dumb-bell solid flat tappet lifters. Free to good home. ///These are gone

chris401 · « **Reply #49 on:** August 06, 2019, 02:08:38 PM »

Quote from: mn67 on July 02, 2019, 02:04:46 PM

New set of Morel dumb-bell solid flat tappet lifters. Free to good home.

I can use them. PM sent.
Thanks

chris401 · « **Reply #50 on:** November 16, 2019, 09:13:26 AM »

Quote from: Drew Pojedinec on May 05, 2015, 10:12:44 PM

ok all my freebies have been given away.

Guess the thread served it's purpose in some way.

I have a box of non adjustable rockers with refinished tips. One or all pay shipping.

57 lima bean · « **Reply #51 on:** December 24, 2019, 12:20:02 PM »

Edelbrock 2x4 intake for Carter carbs.Photo is what receipt will look like.30 pack of Special Export should be in hand upon arrival.TC area of Mn. *****Gived***Thanks TDC

AlanCasida · « **Reply #52 on:** February 10, 2020, 08:06:53 PM »

I have a full set of FE OEM thermactor plugs if anyone wants them. Free shipping!

ToddK · « **Reply #53 on:** February 10, 2020, 08:42:16 PM »

PM sent.

AlanCasida · « **Reply #54 on:** February 10, 2020, 08:57:47 PM »

Spoken for. Thanks Todd.

urchinhead · « **Reply #55 on:** February 17, 2020, 01:01:39 PM »

I have a couple items that I would like to get out of the garage, if anyone is interested.

1. Complete C6 from a 1966 428 Passenger Car. - Gone

2. Power Steering Bracket, Hoses, Pump and Cooler from a mid 70's FE pickup. - Gone (shipped to Germany).

I would rather not ship these items, but we can work this out if someone really can use them. San Francisco is the location.

mike7570 · « **Reply #56 on:** June 02, 2020, 02:29:28 PM »

1968 Mustang J code front drum brakes, complete. Pretty dirty and rusty, just took them off.
pick up unless you want to pay freight (heavy) So Cal Temecula area. GONE

1 tunnel port intake gasket - send me your address and it's yours. - GONE

Tommy-T · « **Reply #57 on:** August 31, 2020, 02:08:53 PM »

I have 2 sets of SCE 134101 Ford FE intake manifold gaskets. I bought them thinking they fit a Medium Riser port like Edelbrock, BBM, Survival, or Trick Flow. They do NOT fit these heads.

They appear to fit a High Riser style head that uses a Medium Riser port size...a cylinder head that is not in my zip code.

I will ship them at my expense to anyone here that can post a picture of what cylinder head they fit.

blykins · « **Reply #58 on:** August 31, 2020, 04:43:23 PM »

Quote from: Tommy-T on August 31, 2020, 02:08:53 PM

I have 2 sets of SCE 134101 Ford FE intake manifold gaskets. I bought them thinking they fit a Medium Riser port like Edelbrock, BBM, Survival, or Trick Flow. They do NOT fit these heads.

They appear to fit a High Riser style head that uses a Medium Riser port size...a cylinder head that is not in my zip code.

I will ship them at my expense to anyone here that can post a picture of what cylinder head they fit.

Sounds like a Blue Thunder head, Tommy.

thatdarncat · « **Reply #59 on:** August 31, 2020, 07:57:15 PM »

Quote from: blykins on August 31, 2020, 04:43:23 PM

Quote from: Tommy-T on August 31, 2020, 02:08:53 PM
I have 2 sets of SCE 134101 Ford FE intake manifold gaskets. I bought them thinking they fit a Medium Riser port like Edelbrock, BBM, Survival, or Trick Flow. They do NOT fit these heads.

They appear to fit a High Riser style head that uses a Medium Riser port size...a cylinder head that is not in my zip code.

I will ship them at my expense to anyone here that can post a picture of what cylinder head they fit.

Sounds like a Blue Thunder head, Tommy.

I looked in my 2013 SCE Gasket catalog, by the description it looks like the #134101 should have fit what you expected. The catalog shows a #134102 intake gasket for a “Blue Thunder small bore High Riser”, I don’t know if that helps I.D. it? Maybe they were mis-packaged?

Tommy-T · « **Reply #60 on:** September 01, 2020, 01:40:00 AM »

They look just like the 134102's.

Offer still stands. Post a pic of your cylinder head that needs these gaskets and I'll send 'em to ya, my treat.

62Falcon390 · « **Reply #61 on:** September 01, 2020, 05:38:38 AM »

i am looking for a 2 groove crank pulley for a 390.

send me a message, i dont get on here much, thank you

RIck

turbohunter · « **Reply #62 on:** September 01, 2020, 11:28:06 AM »

Tommy, the 134102’s are Blue Thunder port gaskets.
Looks like a mispackage.

AlanCasida · « **Reply #63 on:** November 11, 2020, 05:51:14 PM »

I have a pair of intake valley tins if someone wants to pay shipping. Also, I have a new set of (7) std. Speed Pro rod bearings. I used these bearings in my 427 but upon inspection I found one shell had a defect in it. I was unable to buy just a pair so I had to buy a complete set. These are the remaining bearings. Again just pay shipping if you need some spares or can locate a pair.

Gregwill16 · « **Reply #64 on:** November 11, 2020, 07:57:04 PM »

I'll take the valley tins Alan. PM sent

AlanCasida · « **Reply #65 on:** November 11, 2020, 10:05:13 PM »

Quote from: Gregwill16 on November 11, 2020, 07:57:04 PM

I'll take the valley tins Alan. PM sent

Sounds good. PM sent

frnkeore · « **Reply #66 on:** November 14, 2020, 02:14:15 PM »

Allen,
Throw the bearings in with my pan. I'll try to find another one on Ebay.

Thank you, again.

AlanCasida · « **Reply #67 on:** November 14, 2020, 02:15:33 PM »

Quote from: frnkeore on November 14, 2020, 02:14:15 PM

Allen,
Throw the bearings in with my pan. I'll try to find another one on Ebay.

Thank you, again.

Will do!

rockhouse66 · « **Reply #68 on:** September 15, 2021, 07:02:52 PM »

I have two sets of Standard FD-8182 points new in the box, which are listed as being Y-Block Ford. They don't have the felt wiper pad but they do have Made in USA stamped on them. Free to anyone who can use them as long as you are in the Continental US. Otherwise, I would need some help with the shipping. jimwoods7 at outlook dot com.

Jim Comet · « **Reply #69 on:** October 10, 2021, 06:51:58 PM »

Gone, thanks for looking. Jim

gregaba · « **Reply #70 on:** June 24, 2022, 02:01:43 PM »

63 Galaxie 4 door front seat.
Free seat as it is taking up room in my shop and I have no use for it.
It is to nice to throw away.
Located in southern Oklahoma. Just pick it up.
Greg

RustyCrankshaft · « **Reply #71 on:** September 27, 2022, 09:34:56 PM »

I've been cleaning up the garage and I've got an old Sioux valve grinder and set grinder that I've had for a long time. Needs to be cleaned up and serviced but it all works. The valve grinder had a separate coolant pump that was gone when I got the machines, I never tried to find the correct replacement - I was going to use one of the misters we run on the mill.

I hate to get rid of them, but I don't really have much use for them at this point and I'd like to see them go someplace where they will get some much needed attention.

frnkeore · « **Reply #72 on:** September 28, 2022, 12:34:30 PM »

I will take the valve seat tools.

Let know the shipping and if you have PayPal, I'll pay that way.

Frank

RustyCrankshaft · « **Reply #73 on:** September 28, 2022, 05:01:36 PM »

I do have paypal. I'm not sure shipping this tuff is going to be a reasonable price, but I'll get it on a pallet and see who has the best price - it'll be coming from Western Washington to wherever you're at. Is it residential delivery or commercial?

frnkeore · « **Reply #74 on:** September 28, 2022, 06:52:18 PM »

I'm not to far from you. Fastenal will probably be cheapest.

My address is:
Frank Elliott
6619 Tolo Rd
Central Point, OR 97502

Cell - 541-292-9141

I can unload a pallet.

RustyCrankshaft · « **Reply #75 on:** October 03, 2022, 05:47:14 PM »

I went by Fastenal today and apparently they don't ship. Not sure what the deal is, so I need to go by a different store and see what they say. The other option might be if you want to drive north, next week I'll be near Coos Bay. It's still probably a 4 or 5 hour drive tho. I've got a pallet and will get everything strapped and wrapped tomorrow I think.

TurboChris · « **Reply #76 on:** July 15, 2023, 12:49:10 AM »

I've used www.freightquote.com about 5 or 6 times in the last 2 years and have yet to be disappointed.

jmlay · « **Reply #77 on:** July 15, 2023, 08:07:31 AM »

I received quotes from several brokers, were all high in my opinion. In the end I requested a quote from FedEx that was the most reasonable if I picked it up at theirs depo.

News:

Author Topic: Free stuff for people that don't wanna buy anything! (Read 81197 times)

57 lima bean

chris401

chris401

chris401

chris401

chris401

chris401

chris401

chris401

chris401

57 lima bean

mike7570