« previous next »
Pages: [1]

Author Topic: Cammer Heads...How low can you go  (Read 3226 times)

0 Members and 1 Guest are viewing this topic.

JoeW

  • Newbie
  • *
  • Posts: 21
    • View Profile
Cammer Heads...How low can you go
« on: June 20, 2014, 12:32:41 PM »
Jay

I know i said i would get the picture for you I just did not know it would take this long.
The heads finally came out of the safe when I had my camera.
So here is a picture of number 5

Logged

JoeW

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: Cammer Heads...How low can you go
« Reply #1 on: June 20, 2014, 12:36:05 PM »


« Last Edit: June 20, 2014, 12:45:02 PM by JoeW »
Logged

TomP

  • Guest
Re: Cammer Heads...How low can you go
« Reply #2 on: June 22, 2014, 12:58:53 PM »
Looking at those makes me wonder how the oil passages are routed. Complicated looking needing oil to all those cam bearings and the two rocker shafts. There must be several long oil passages.
Logged

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7562
    • View Profile
    • FE Power
Re: Cammer Heads...How low can you go
« Reply #3 on: June 23, 2014, 10:40:52 PM »
There's only one long oil passage Tom, all the smaller passages are drilled to intersect that one.  Here are some pics of #3:



Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   
Pages: [1]
« previous next »