Although I'm in Australia, I thought I'd offer these heads for sale here. I have a new, unused pair of Pond alloy MR heads for sale. They are "Stage 1", with as cast ports, although the bowls have been blended and the intake ports gasket matched. They have the large machined MR chambers, 88cc. Valves are stainless 2.25" intake and 1.73" exhaust. The valve spacing is medium riser width. They flow 296/207 at 0.500", 305/213 at 0.600" and 315/220 at 0.700". They are set with up springs to suit a 0.650" lift hyd roller cam, steel retainers and Viton seals. Externally, they look very much like factory casting, and only have a SK casting number between the centre exhaust ports. All the threads have inserts. They are a real nice street head that are capable of supporting over 750hp on pump gas when ported.
I'm selling these due to a change of direction in the planned engine project.
These heads sell new from Robert Pond for $2697. I'm asking for $2000. I'm not sure how much shipping to the US would be, last item I sent was a complete dry sump kit that cost about $280 via UPS. If anyone is interested, I can check shipping options. For any more info, please email me. Thanks.
