Author Topic: Public Service Announcement for EFI Guys  (Read 466 times)

0 Members and 1 Guest are viewing this topic.

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 610
  • Andy
    • View Profile
Public Service Announcement for EFI Guys
« on: November 15, 2026, 06:30:43 PM »
Years ago I had read that older ignition switches (especially Ford & Chrysler) had dead spots in them between ignition and start that of course result in the EFI computer rebooting. It is so brief it never worries a carby car.  I had noticed some rebooting on my Sniper over the years but it always started alright (thought it could be better) and I put the rebooting down to voltage drop when you hit the starter. The other day I decided to test the dead spot thing. Especially easy with an auto. Just put it in D (neutral safety lockout) and slowly turn the key from ignition to start and watch the Sniper screen. Sure enough there was a dead spot between ignition and start and another at the end of the start position.

So I decided to put in a start button to see if it made a difference. Not wanting anything obvious I used the V8 emblem that is the choke delete filler on Aussie cars. The key still works too. As I said, car always started 'alright' but it definitely starts better now! No rebooting of the screen either.



« Last Edit: November 19, 2026, 08:08:56 PM by 66FAIRLANE »

galaxiex

  • Sr. Member
  • ****
  • Posts: 282
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #1 on: November 16, 2026, 05:52:39 AM »
Good info, good to know. Thanks!
Is that a custom dash in your Fairlane?
Love to see a pic of the entire dash.

Looks like you have a Gear Vendors OD?
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

My427stang

  • Hero Member
  • *****
  • Posts: 4406
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #2 on: November 16, 2026, 08:07:52 AM »
Thanks!

---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 610
  • Andy
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #3 on: November 16, 2026, 05:16:13 PM »
Not a custom dash, although I did make the white gauge faces. Google XY GT dashboard images. Yeh that's a GV where the clock used to be.

galaxiex

  • Sr. Member
  • ****
  • Posts: 282
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #4 on: November 16, 2026, 07:33:12 PM »
Not a custom dash, although I did make the white gauge faces. Google XY GT dashboard images. Yeh that's a GV where the clock used to be.

Oh, I assumed that was the dash in your 66/67? Fairlane signature picture.

I see the XY GT is a different car.
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 610
  • Andy
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #5 on: November 17, 2026, 12:57:50 AM »
It is. Mines had an Aussie 'chassis' grafted on the front through the floor and A pillars. The Falcons and Fairlanes of 67 through 71 here used basically the same unibody as the US cars and dashboards are interchangeable between 67 & 68 (XR, XT, ZA, ZB) and 69 to 71 (XW, XY, ZC, ZD). Mine has the XY GT dash.

My 67 vert on the otherhand has a ZB Fairlane dash. Another one for you to google.  ;D
« Last Edit: November 17, 2026, 01:06:00 AM by 66FAIRLANE »

gregb

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #6 on: November 17, 2026, 09:44:30 AM »
Good to know…was wondering why I get a reboot occasionally. Even though I checked the switch, I’ll have to check again. 

galaxiex

  • Sr. Member
  • ****
  • Posts: 282
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #7 on: November 17, 2026, 07:23:52 PM »
It is. Mines had an Aussie 'chassis' grafted on the front through the floor and A pillars. The Falcons and Fairlanes of 67 through 71 here used basically the same unibody as the US cars and dashboards are interchangeable between 67 & 68 (XR, XT, ZA, ZB) and 69 to 71 (XW, XY, ZC, ZD). Mine has the XY GT dash.

My 67 vert on the otherhand has a ZB Fairlane dash. Another one for you to google.  ;D

Thanks!

Aussie stuff is cool and always different in a good way, from the NorAm stuff.

You might know this one...
Back in the 80's I worked on a couple of transmissions for a guy that owned a Humber.
I think it was a late 50's vehicle?
Guy here in Canada had 3 of them.
All equipped with manual transmissions.

He sourced the parts from "somewhere" when I got them apart and told him what they needed.
Few weeks later he shows up at the shop with the exact parts.

Never worked on, or seen one since.

Kind of an Aussie "Rolls Royce" from my bad old guy memory....
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 610
  • Andy
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #8 on: November 17, 2026, 08:42:20 PM »
Hi galaxiex. They were a British car probably assembled as CKD here for a while. Don't know a lot about them, can't really remember seeing too many in my youth either.

Rory428

  • Hero Member
  • *****
  • Posts: 1158
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #9 on: November 20, 2026, 07:47:16 PM »
It is. Mines had an Aussie 'chassis' grafted on the front through the floor and A pillars. The Falcons and Fairlanes of 67 through 71 here used basically the same unibody as the US cars and dashboards are interchangeable between 67 & 68 (XR, XT, ZA, ZB) and 69 to 71 (XW, XY, ZC, ZD). Mine has the XY GT dash.

My 67 vert on the otherhand has a ZB Fairlane dash. Another one for you to google.  ;D

Thanks!
I remember seeing several Humber "Super Snipe" cars years ago, when I lived in British Columbia. Don`t know much about them, and haven`t seen one in decades.
Aussie stuff is cool and always different in a good way, from the NorAm stuff.

You might know this one...
Back in the 80's I worked on a couple of transmissions for a guy that owned a Humber.
I think it was a late 50's vehicle?
Guy here in Canada had 3 of them.
All equipped with manual transmissions.

He sourced the parts from "somewhere" when I got them apart and told him what they needed.
Few weeks later he shows up at the shop with the exact parts.

Never worked on, or seen one since.

Kind of an Aussie "Rolls Royce" from my bad old guy memory....
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. 428 Cobra Jet, 4 speed Toploader. 12.54@ 108 MPH