Clearing the decks

[turbohunter]

Hi guys
I have recently made the decision that I am not going to get to a few things in life. To many hobbies and not enough time. So I am offering these parts I have been saving up for quite a few years. I am trying to price these things at prices you can’t get nowadays. For instance the block I bought from BBM for IIRC $3850 years ago. Don’t want to make a dime off it so $3850. I know they are over 4k today. All I want to do is clear things out. Not looking to make a fortune. I’m also going to get rid of my old 1961 unibody pickup with a 292. It has been used so its a 20 footer but a great truck. I have the 5 speed kit built by Mummert with tranny that I’ll throw in as well as a front disc brake kit that I never got around to installing.
This site though awesome is extremely slow for me (not anymore) so you can text me at eightoneeight fiveonenine twooneoneseven.
Or email me at marchunteratsbcglobaldotnet.
If you can’t figure those out, pm me and I’ll make it clearer. And I’ll be happy to give you pictures or explain the parts. OBTW you have to pay for the ride or if you’re around Tennessee somewhere we can figure it out.
Ok here’s the list.
1 BBM block from the second or third run, I can’t quite remember $3850. SOLD
Scat forged 4.375 crank NIB never opened pn#7-4274375-PCG-33 $1800. SOLD
Scat H beam 6.7 rods NIB $600 Pending 11/28 SOLD
Weiand 351 tunnel ram unused. Has been whittled on a bit to fit on Jays adapter. $500 SOLD
TFS heads assembled by Brent so with springs and valves. Unused, they are bolted on an engine I was going to build but rethinking what I want out of it. $2000 Pending 11/28 SOLD
Jim Dove intake manifold with Jim’s name on the front runner plus a super sucker spacer $800 Sold
NIB set of Morel solid roller lifters $400 SOLD
FE Power water pump adapters $200
FE Power timing chain cover $250 SOLD
Electric water pump $200 SOLD
406 steel heads bare. After much research and having Brent look at them and a few other guys that should know as well as buying them originally from Valley head service in LA who sold them to me as 406 heads. Of course will show you pics. $500
2 660 center squirters bought from John V. IIRC they were on his boat. $800 SOLD
1 set of Hooker Super competition Fairlane headers. 2 inch tubes. $550 SOLD
1 set of 1963 T bird headers again if interested I’ll fill you in. $400
I’m also going to sell my ‘67 Fairlane (that this motor was going in) pretty inexpensively, text me for info I’ll call you back. Pending 11/28 SOLD.
As mentioned above I’m going to sell my trusty y block truck. Text me.
I will also be selling my enclosed car trailer in the future. Lots of stuff in it now. Let me know if interested.

[jmlay]

Mark,

I would like to by your Bbm block.

Mike

[turbohunter]

Just a few pix because I was so vague.
I’ll keep adding.

[turbohunter]

The C3’s next to my CJ N heads. They are small chambered. Brent told me the chamber volume is low around 60cc.
Small chambers


Right number


Right date


Right chamber


Machined seats


Here’s the badge off the Fairlane headers.

[turbohunter]

I was perusing the posts and I saw that Brent is selling TFS heads for $2450. My stated goal was to sell my junk for less than you can get it, so I chopped the price to $2000. Pending 11/28

[turbohunter]

A few guys have asked so I’ll just make a post.
I’m fine, my health is great. I am just at the point where I can only handle so many projects at once. Even though retired I’m busy all day every day. I still have my 428 mustang and 428 Country Squire. And the Squire is part of the reason I’m doing this. You guys remember when I found the 428 that was the exact engine for a Shelby? I swapped him engines so that he could have the exact engine for his car and he gave me in return a ‘69 CJ. The top of the motor you see in those pics is on the CJ short block. I had all this fun stuff and was figuring why not make a really fun engine so I was putting a really nice top end on the CJ block. Meanwhile my N heads were swearing at me. Well I’ve succumbed to the guilt. The CJ stuff should be together. So I’m taking all those sweet pieces off and selling them then putting the CJ engine in my 428 Squire instead of it having a 390 in it. So now the wagon which I love will have an actual 428 in it.
That of course leaves me with a perfectly good running 390 but that will be another story.
Anyway this has been a long winded way of saying thank you for the concern.

[turbohunter]

More pics
I didn’t list the pan in the original post but I have it and it’s for sale if you’re interested. $250 w/pickup SOLD 11/29
Measured the header tubes for Fairlane, they’re 2 inch.

[67xr7cat]

Hi,

I am interested in the oil pan and pick up.  Sent you a PM.  Thank you, Steve

[turbohunter]

Things still available. Maybe I asked to much for them so I’m dropping them. Pics are above. If you need more info let me know.
Weiand 351 tunnel Ram (been whittled on to fit Jays adapter). $500
Jim Dove intake (fits really well to out of box TFS heads) + Super Sucker spacer. This combo has been massaged/blended together. SOLD
NIB set of Morel solid roller lifters $400
New FE Power electric wp adapters (alternator mount bosses) $200
406 iron heads $595
Pair of 660 center squirters $800 SOLD

[GJCAT427]

 Any Idea what the shipping would be to western NY on the 406 heads 14787 zip code. Alsowhere are you located? road trip might be possible. Garry

[turbohunter]

Hi Garry
Located in Columbia, Tennessee.
I’ll go over and weigh them this week and work out the cost of the trip. Give me a day or two.

[BOutlaw]

Pm sent regarding tunnel ram

Brad

[turbohunter]

A few things left.

Weiand 351 tunnel Ram (been whittled on to fit Jays 13001 adapter, maybe others). Picture above. $500 SOLD
Jim Dove intake (fits really well to out of box TFS heads) + Super Sucker spacer. This combo has been massaged/blended together. $800SOLD
NIB set of Morel solid roller (pn 5454) lifters $400 SOLD
New FE Power electric wp adapters (alternator mount bosses) $200
406 iron heads. Pics above. $595

[turbohunter]

Thought I’d bump this up and reduce some prices.

Weiand 351 tunnel Ram (been whittled on to fit Jays 13001 adapter, maybe others). Picture above. $450 SOLD
Jim Dove intake (fits really well to out of box TFS heads) + Super Sucker spacer (pics above). This combo has been massaged/blended together. $800 SOLD
NIB set of Morel solid roller (pn 5454) lifters $400 SOLD
New FE Power electric wp adapters (alternator mount bosses) $200
406 iron heads. Pics above. $500