I finally made a webpage for Holley parts

[Drew Pojedinec]

In the course of doing restorations, I often have had thousands of custom parts made.
These were sitting in bins in my shop.
I’ve also gotten requests for rebuild kits and parts for the specific Ford carbs I work on, etc.
I decided it was time to get the stuff all listed for sale in one place.

https://www.afscarbs.com/

In the future I hope to have 5-6 hour rebuild videos available. I will continue to list parts as I have time (there are a ton of them).
Blog posts will be added with technical information periodically.

Check it out
Thanks
Drew

[winr1]

Bookmarked and will spread the word

Ever think about 2100 or 4100 rebuilds ??




Ricky.

[Stangman]

This is great Drew. Taking it to another level.

[Drew Pojedinec]

Bookmarked and will spread the word
Ever think about 2100 or 4100 rebuilds ??

I only have 5 months a year on land.  In that time roughly 200 Holleys get sent  to me to restore.  If you sent a carb to me right this minute, I would likely begin work sometime around December.
Not really sure that accepting in more stuff like Autolites is a good idea.

[winr1]

Gotcha.....   when an if ya have time, any advice on air bleeds an such on a 4100

I know what all the various holes do but not sure where to start

I have a few bodies and boosters I could sacrifice

I rebuilt one of my 600 vacuum sec. holleys, it idles smoother and feels like more power taking off than various 4100s I have used


Ricky.

[manofmerc]

Drew I have some holley parts I would like to get rid off contact me if interested .The parts are reo pumps an 830 main body and a few other pieces .Pricing would be reasonable.Doug

[Drew Pojedinec]

Doug, just email whatever you have and what you want for it to airfuelspark78@gmail.com

[manofmerc]

I will do so in a couple of days .Doug

[manofmerc]

Did my pm go through ? If so I gave a wrong p.n. for the main body the correct # is 9381 .If you didn't get the pm I will contact you by email .Thanks Drew .Doug

[Drew Pojedinec]

Doug,
Not really interested in non Ford parts.  I have a small shop and cannot really crowd it with more stuff.
and yes, I got the pm, I just don't log in here much.

Thanks

[manofmerc]

I understand all Is good! Doug