Time to move on, got another project that interests me right now. '
Things I've got for sale:
*Custom R&R aluminum connecting rods. 7" length, SBC pin diameter, for standard FE rod journal dimension. In discussion with R&R, street driving was the goal with this. - $1000
*Bare with valves, C6AE-R cylinder heads, ported by Joe Craine. These are being freshened up as we speak (even had them steel abrated again), with new bronze valve guides, 5/16" stem 2.180" intake valves, and Manley titanium 11/32" exhaust valves. All brand new parts. Bare heads, with valves, fully machined, ready to assemble. Heads flow about 290 cfm on intake side. Last chamber volume measurement was 64cc. Time Serts in stand holes. - $1250
*Custom Comp Cams solid roller camshaft. 256/266 @ .050", 106 LSA, .680"/.700" gross lift. This is a great little camshaft, not hard on springs, pulled to 7500 rpm effortlessly with the 352 and above cylinder heads. - $200
*PAC small diameter dual valve springs with Manley titanium retainers. Dyno time. Didn't lose any spring pressure after dyno testing. 280/680 spring pressure the way they were set up. $200 for whole shooting match. Sold as used parts.
Can do a package deal as well and I'm open to offers.
