Author Topic: Need an intake adaptor for this one !  (Read 1656 times)

0 Members and 1 Guest are viewing this topic.

427LX

  • Sr. Member
  • ****
  • Posts: 258
    • View Profile
Need an intake adaptor for this one !
« on: September 04, 2021, 12:53:34 PM »
Wow :o      https://youtu.be/DZPEDZEFAuc!   

67xr7cat

  • Sr. Member
  • ****
  • Posts: 315
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #1 on: September 04, 2021, 01:20:01 PM »
The new 7.3 gas engine is the modern FE. Just only offered in the trucks so far which makes it a bit harder to package in a car, but looks like the aftermarket is working on it!





gregaba

  • Hero Member
  • *****
  • Posts: 931
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #2 on: September 04, 2021, 07:02:00 PM »
If i just had an extra 30,000 i would build one.
Greg

hbstang

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #3 on: September 04, 2021, 08:14:09 PM »
If i just had an extra 30,000 i would build one.
Greg
summit racing has brand new ones for $6849.99 plus free shipping!i think its a fair price.there is dyno video where they get over 500 hp with just a tune and headers.

482supersnake

  • Full Member
  • ***
  • Posts: 113
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #4 on: September 05, 2021, 10:34:14 AM »
I was really thinking about one of these for my mustang but it looks like hood clearance is going to be an issue.

gregaba

  • Hero Member
  • *****
  • Posts: 931
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #5 on: September 05, 2021, 10:54:05 AM »
I was kind of joking about the $30,000 untill I started to figure out what it would cost to build one.
Engine is 6850+frieght.
Control pac won't be out until spring or summer, my best guess is between $1500 to 2500.
Tranny  can be picked up for 500 to 2000 used.
Headers best guess is 700-1500.
Intake ? 1000.
Oil Pan-? 300-800?
Motor and trans mounts- whatever your time is worth.
I have found a 64 2 door Fairlane for $5000 I could use for a body. No drivetrain but super nice.
A whole bunch of other stuff [fuel system new cam etc.] that I can think of so not 30,000 but close to 20,000 if you start from scratch.
I did find out the HP and torque figures are with the engine in the vechile with all accessorys hooked up and running.
With the cost to build a car with this engine is a little high I think I would go ahead and build one. I don't think you will find another engine with this potential any where else including the LS.
I think Ford has hit this one out of the ballpark.
Greg

 
 

galaxiex

  • Full Member
  • ***
  • Posts: 185
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #6 on: September 05, 2021, 11:22:54 AM »
Yeaaaahh, we need a post "Like" button!


.... and/or a "Thumbs Up" button!  ;)   ;D
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

GerryP

  • Hero Member
  • *****
  • Posts: 566
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #7 on: September 05, 2021, 12:12:30 PM »
If I was going to do a modern engine transplant, I'd go with the 6.2 cammer.  A nearly bullet proof and proven design used in the last gen Raptor and the current Super Duty as the base engine.  They are available in salvage yards for a song.  Of course, there is the Coyote but that would be a wee bit more expensive than a 6.2.

shady

  • Hero Member
  • *****
  • Posts: 1002
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #8 on: September 05, 2021, 03:28:29 PM »
I drove a 7.3. Impressive. Not even close to a 6.2. And the exhaust note...nice.
What goes fast doesn't go fast long'
What goes fast takes your money with it.
So I'm slow & broke, what went wrong?
2021 FERR cool FE Winner
2022 FERR cool FE Winner
2023 FERR cool FE Winner

TomP

  • Hero Member
  • *****
  • Posts: 870
    • View Profile
Re: Need an intake adaptor for this one !
« Reply #9 on: September 10, 2021, 03:40:20 PM »
The 5.0 Coyotes out of pickup trucks are cheap but beware all the differences to swap one. The 6.2 is a real orphan and speed parts will be a challenge. It is also HUGE, go measure one. I am not sure a Galaxie would have enough space without moving the master cylinder and steering box and upper control arms.