Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?

[R-WEST]

I think this is first I've been here in about 5 years!!  Life, work, health conspires against you sometimes. 

Looking at doing a stroked 351C (3.75" crank; 6.00" rods) for my pickup and am curious about what you all think about the aluminum "2V/4V" heads, primarily Trick Flow and Edelbrock, that are out there. 

Thanks!!

[blykins]

CHI 4V.

The edelbrock heads flat out stink for the Cleveland.  The CHI performs over the TFS.

[R-WEST]

Hi Brent - I figured you'd pop in right away!! 
I'll be in touch.
Thanks,
Ron

[Falcon67]

Then shortly you'll be wanting a block.  Just sayin'.   

[R-WEST]

I already have the 4-bolt block from my '73 Mach 1.