WTB Tunnel wedge

[BigBlueIron]

Has anyone picked up a Trick flow that they no longer need and are willing to shake it loose. New is few months out from talking with Trickflow.

[MeanGene]

I have a real clean Dove, I hadn't thought about selling it as it is all set up with 660s, linkage etc

[BigBlueIron]

Well that might work but I'm not in need of carbs.

[Mbowling]

Search/look for Carl’s ford parts in Ohio. He may have a trick flow.

[cjshaker]

PM sent

[dozz302]

Trick flow is coming out with a tunnel wedge??

[wowens]

I have anew BBM

[thatdarncat]

Trick flow is coming out with a tunnel wedge??

A few years ago Trick Flow started showing around a prototype Tunnel Wedge intake, with the description that it was coming soon. But they kept pushing back when it was going to be available, and that went on for a couple years or more. Finally at one point the Trick Flow Tunnel Wedge intakes suddenly became available, and quite a few people jumped on them...then they were out of stock again, with no word on when they would be available again.

By all reports I saw it seemed to be a quality part, and a few people showed their builds with them, but I don’t think I ever saw anyone do a side by side comparison with the Trick Flow to an original, or a Trick Flow to a BBM version. Hopefully they will be back.

If you do a search on here you should find some info.

[cjshaker]

Trick flow is coming out with a tunnel wedge??

http://fepower.net/simplemachinesforum/index.php?PHPSESSID=jf1tdedfpeg5mu8gvika9idmb7&topic=9343.0;all

[Jb427]

BBM don't have any instock? I used a BBM one on my build

[BigBlueIron]

BBM's are available.

 This is a small cube (364") build. A tunnel wedge of any brand is probably a poor choice for a 352.  I feel the Trick Flow version maybe better suited with its slighter smaller plenum and runner size.

[dozz302]

Thanks for the reference! Great post <> didn't know.

[Joe-JDC]

Have you found/bought a TW yet?  Joe-JDC