I have some high quality parts left over from my 2 previous 465 cube Tunnel Port builds. They have dyno time only. Shipping in the continental US is included in the price just to make it a little easier on me so I don’t have to run back and forth to UPS etc. Preferred payment by USPS money order. I will take a personal check and will ship after it clears the bank. Remember prices include shipping ! Click on my name for E-mail address.
I have 2 sets of Diamond Custom Pistons with pins, will need spirolox. Both are for 3.98 stroke.
1. Bore 4.310, Compression Ht. 1.360, Ring pack .043, .043, 3.0 – these were for a pump gas build that made 605 HP. $500.00 The first cam and springs listed below were used in this build.
2. Bore 4.310, ring pack same, I don’t have sheet on them but they were for 12:1 compression and were just switched out for the ones above. Pins included and still have the rings on them. Cam was changed and we made 700hp with them. $500.00
3. Bullet branded Morel Solid Roller Lifters. Needle Bearing/Pressure Fed $ 495.00
4. Set of 3/8 stem Jet Flow valves, 2.25 intake/1.75 exhaust . Originally purchased from DSC. $200.00
5. Bullet Solid Roller Cam, Duration @ .050 260 int./270 exh. ICL 104 and LSA 106, 625/650 lift $275.00
6. Valve springs for the Bullet Solid Roller are PAC. 280 seat/ 630 open. $225.00
7. Comp Cams Solid Roller Cam, 260/270@.050, 108 LSA, Lift 742/750, LSA 104. $275.00
8. Valve springs for the Comp Solid Roller. PAC 1300 series endurance springs, 265 seat, 636 open, I think these were more like 660 open but can’t find the card but they worked great with this cam. $ 275.00
9. Trend push rods 9.00 length ball/cup, wall 0.135 $215.00
10. Trend push rods 9.150 length ball/ball –for T&D Rockers , wall 0.105 $ 215.00
