« previous next »
Pages: [1]

Author Topic: DannyBee crankshaft gear  (Read 2603 times)

0 Members and 1 Guest are viewing this topic.

fekbmax

  • Hero Member
  • *****
  • Posts: 1487
    • View Profile
DannyBee crankshaft gear
« on: January 20, 2016, 09:11:38 PM »
Can anyone tell my how many teeth is on the crank gear ?
Logged
Keith.  KB MAX Racing.

57 lima bean

  • Guest
Re: DannyBee crankshaft gear
« Reply #1 on: January 21, 2016, 11:20:10 AM »
Half as many that are on the cam gear... :)Looked at a shot of the belt set up.Hard to count but many.
Logged

fekbmax

  • Hero Member
  • *****
  • Posts: 1487
    • View Profile
Re: DannyBee crankshaft gear
« Reply #2 on: January 21, 2016, 12:32:07 PM »
Ok, I'll find a decent pict o the cam gear then maybe. Just was looking for the easy way out.
Logged
Keith.  KB MAX Racing.

XR7

  • Guest
Re: DannyBee crankshaft gear
« Reply #3 on: January 21, 2016, 12:35:02 PM »
Are you still trying to use a Cleveland set-up on the FE? I do think the cam to crank bore centerline height dimension is the same.
Logged

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7564
    • View Profile
    • FE Power
Re: DannyBee crankshaft gear
« Reply #4 on: January 21, 2016, 01:17:33 PM »
Keith, I've got a picture of the Danny Bee belt drive in the thread below.  You've got to zoom in to see it, but you can count the number of teeth on the cam gear if you are careful.  Using 57 Lima Bean's brilliant deduction ( ::)), there are 30 teeth on the Danny Bee crank gear.

http://fepower.net/simplemachinesforum/index.php?topic=168.0
Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

Heo

  • Hero Member
  • *****
  • Posts: 3380
    • View Profile
Re: DannyBee crankshaft gear
« Reply #5 on: January 21, 2016, 01:21:06 PM »
Use 29 teeth so the CAM opens faster ;D ;D
Logged



The defenition of a Gentleman, is a man that can play the accordion.But dont do it

fekbmax

  • Hero Member
  • *****
  • Posts: 1487
    • View Profile
Re: DannyBee crankshaft gear
« Reply #6 on: January 21, 2016, 02:06:35 PM »
Thanks guys, I had just zoomed in on your cam gear from the same post Jay. Shoulda done that to start with but I was. Don't lazy I guess.
FE and cleveland both have same center to center. 5.044
Logged
Keith.  KB MAX Racing.
Pages: [1]
« previous next »