ARP Rocker Shaft Stud Length with Edelbrock heads.

[67428GT500]

I installed the ARP rocker studs that I was running with my iron heads. The tapered stud that is specific to the oiling that has a flange stop above the threads seats before the flange seats against the head.
Is this a concern, or run it as is? It seems to be about .250 taller than the other studs.

                                                                               -Keith

[My427stang]

That stud is shorter for aluminum heads, if you have enough threads it should be fine but typically you match the studs to the type of head