1
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 17, 2016, 03:36:07 AM »
shipping will be about 300 more... i guess.. 
.
.
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 14, 2016, 02:11:44 AM »
looks good, but quite expensive:) you're right, long tube headers will be the best.
3
FE Technical Forum / Re: AUTOLINE C834A Carburetor Replacement
« on: November 10, 2016, 06:31:59 AM »
damn, i found out that my 2V 390 got a lower compression (9,5:1) than the 4V model (10,5:1)... so im really undecided if its worth to hot up this engine... maybe i should cruise it while i fully build up an really hot engine and after finishing i could swap the engine in the car. especcially to keep the historic shape.. (also important for german historic regeitration)
-are there any posts about "frame off" engine building? including pictures and specification?
-guess about the full costs of an project like this... plus 30% cause of german location^^
-are there any posts about "frame off" engine building? including pictures and specification?
-guess about the full costs of an project like this... plus 30% cause of german location^^
4
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 09, 2016, 03:18:12 AM »
it really looks like it wont fit... but i aint got a chance to try it... will see. first step is done: its registered now. i guess you wont believe, but this was the first problem, cause of the small numberplates and the import status.
5
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 08, 2016, 05:21:02 AM »
so really nobody could tell me which headers will defenetly fit to my country squire? 
6
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 02, 2016, 03:35:19 AM »
my father in law is in california until the 17th. will it arive there till then?
7
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 01, 2016, 01:45:51 PM »
FElony-
feeling like a noob cause ive recognized these long tube headers but never knew what theyre for....
but good to know that headers swap wont change that much. gonna watch more of these engine masters videos know. great link, thanks
feeling like a noob cause ive recognized these long tube headers but never knew what theyre for....
but good to know that headers swap wont change that much. gonna watch more of these engine masters videos know. great link, thanks
8
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 01, 2016, 01:22:45 PM »
uhhh im really interested in the book, but honestly, over 30 bucks for shipping 
but you really got my respect for the book. seems to be really professional!
so maybe some steeltube headers are available at the german aftermarket.... dont believe that hi perf. headers are available...
but you really got my respect for the book. seems to be really professional!
so maybe some steeltube headers are available at the german aftermarket.... dont believe that hi perf. headers are available...
9
FE Technical Forum / Re: AUTOLINE C834A Carburetor Replacement
« on: November 01, 2016, 01:05:59 PM »
still reading... incredible stuff 
10
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 01, 2016, 08:07:37 AM »
for your book??
what will increase power in a header?
-diameter
-less turbolences
what else?
what will increase power in a header?
-diameter
-less turbolences
what else?
11
FE Technical Forum / Re: Change headers on my 69' Country Squire
« on: November 01, 2016, 06:55:22 AM »
oha. Nice... I will check later, cause Im in the bureau now
12
FE Technical Forum / Re: AUTOLINE C834A Carburetor Replacement
« on: November 01, 2016, 06:53:55 AM »
my printer is glowing ;-) awesome link mate... thanks!
13
FE Technical Forum / Change headers on my 69' Country Squire
« on: November 01, 2016, 01:42:38 AM »
hey folks,
I was one step away from buying an old header of a mustang 67' for my 390. fortunately I a look under my hood yesterday and recognized theres a beam freakin tight to my stock headers
So my question is:
anybody knows which headers will fit into my car?
wanna improve my flow because I read about worse powerloss cause of my mean stock headers...
second question is how much HP improvement I could expect from the swap?
lateron i could post a picture...
heres the part i wanna install : https://www.ebay-kleinanzeigen.de/s-anzeige/ford-mustang-1967-auspuffkruemmer-fuer-390-bigblock/532334745-223-17192
I was one step away from buying an old header of a mustang 67' for my 390. fortunately I a look under my hood yesterday and recognized theres a beam freakin tight to my stock headers
So my question is:
anybody knows which headers will fit into my car?
wanna improve my flow because I read about worse powerloss cause of my mean stock headers...
second question is how much HP improvement I could expect from the swap?
lateron i could post a picture...
heres the part i wanna install : https://www.ebay-kleinanzeigen.de/s-anzeige/ford-mustang-1967-auspuffkruemmer-fuer-390-bigblock/532334745-223-17192
14
FE Technical Forum / Re: Which Oil ? documentation?
« on: November 01, 2016, 01:34:51 AM »
bought the VR1, still waiting for my concrete to install my auto lift. then i will pull of the pan and have a look for the oilpump. dont want to buy new parts without an diagnosis...
15
FE Technical Forum / Re: AUTOLINE C834A Carburetor Replacement
« on: November 01, 2016, 01:31:20 AM »
sounds great. could you give me a link or a ID Number for the brochure?
-never run stock air filter ;-)
-never run stock air filter ;-)